B-63874EN-1/02 1.MANUAL MEASUREMENT FUNCTIONS
- 25 -
<12>After performing measurement, press the [→] cursor key to
select "T-TOOL."
If you want to specify a milling tool offset number as the item
for which the offset value is to be set, go to select "M-TOOL."
NOTE
With the CNC for a machining center, the “T-TOOL”
screen is not displayed.
<13>Enter a turning tool offset number in "TOOL OFFSET NO. T-
SIDE."
When an offset number is entered, the current offset value for
the offset number is displayed on the right section of the screen.
<14>In "OFFSET KIND," specify an offset value for which the
measurement result is to be set.
NOTE
1 The "Y-axis offset" function is an option.
2 The "tool geometry/wear offset" function is an
option.