B-63874EN-1/02 1.MANUAL MEASUREMENT FUNCTIONS
- 73 -
1.5.6 INSIDE WIDTH MEASUREMENT
Measurement procedure
<1> Select "INSIDE WIDTH MEASUREMENT" from the post-
machining inspection menu select screen.
The items displayed on this screen and the operating procedure
for them are the same as for OUTSIDE WIDTH
MEASUREMENT.
(How to calculate the setting value)
The setting value is calculated as follows:
T-TOOL screen
Measurement direction Setting value
X,Y,Z
(Target value – measurement result)
÷ 2 × offset value
M-TOOL screen
Measurement direction Setting value
X,Y,Z
-(Target value – measurement result)
÷ 2 × offset value
NOTE
The offset value is specified as a measurement
condition.
Measurement
The contents are the same as for "INSIDE WIDTH
MEASUREMENT" on the "WORK SET" menu.