Revision of Additional Manual Page 1
Additional Manual
1/2
Design.
Date Ed.
1
05.02.01
S
HEET
DRAW. No.
C
U
S
T.
TITLE
G.Li
Revision of αi series Spindle software
9D53 edition F and 9D70 edition E
A-63448E-110
FANUC LTD
01
Revision of Spindle software 9D53 edition F, 9D70 edition E
1. General
αi series Spindle software 9D53 and 9D70 series was revised as follows.
2. ROM series, edition and applied PCB
ROM
drawing No.
ROM
edition
SPM specification Applied PCB Notes
A06B-6111-H553
9D53
edition F
(06)
A06B-6111-Hxxx#H553
A06B-6112-Hxxx#H553
A06B-6121-Hxxx#H553
A06B-6122-Hxxx#H553
A20B-2100-0800
A20B-2100-0801
16i/18i/21i,
15i,0i,
for synchronous
spindle motor
A06B-6111-H570
9D70
edition E
(05)
A06B-6111-Hxxx#H570
A06B-6112-Hxxx#H570
A06B-6121-Hxxx#H570
A06B-6122-Hxxx#H570
A20B-2100-0800
A20B-2100-0801
30i/31i/32i,
for induction
& synchronous
spindle motor
3. Contents of modification
Contents 9D53/F 9D70/E
AMR offset data display function is added.
(Please refer to item 4 for details.)
:revised item
Contents Summary of Revision of Additional Manual
- Page 1Revision of Spindle software 9D53 edition F, 9D70 edition E 1. General αi series Spindle software 9D53 and 9D70 series was revised as follows. 2. ROM series, edition and applied PCB ROM ROM SPM specification Applied PCB Notes drawing No. edition A06B-6111-Hxxx#H553 16i/18i/21i, 9D53 A06B-6112-Hxxx#H
- Page 24. AMR offset data display function in Diagnostic screen [9D53/F, 9D70/E] 4.1 General Related to AMR offset function to use in the case of synchronous spindle motor drive, the function for confirming AMR offset nominee value with CNC diagnostic screen was added. By using this function, a spindle che