Printing method change of MDI keys Additional Manual Page 1

Additional Manual
TECHNICAL REPORT (MANUAL) 


1
152E
DateOctober 29, 2001
General Manager of
Hardware Laboratory
Printing method change of MDI keys
Communicate this report to:
Your information only
GE Fanuc-N, GE Fanuc-E
FANUC Robotics
CINCINNATI MILACRON
Machine tool builder
Sales agency
End user
Summary for Sales Documents
Notice
Attached Document
Drawing
No. A-82342E
Original section of issue
Vice General
Manager
Department
Manager
Section
Manager
Person in
charge



IDE

Contents Summary of Printing method change of MDI keys Additional Manual

  • Page 1TECHNICAL REPORT (MANUAL) 1  152E DateOctober 29, 2001 General Manager of Hardware Laboratory Printing method change of MDI keys Communicate this report to: Your information only GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON Machine tool builder Sales agency End
  • Page 2Printing method change of MDI keys 1. Summary As the MDI that is shown below, the printing method change from sublimation printing*1 (refer to 2/3 page) to lazer printing (refer to 3/3 page). Both of the printing method are slightly different distinction of printed matter, but the lazer printing hav
  • Page 3     Printing method change of MDI keys DRAW. NO.  CUST. Edit Date Design Description FANUC LTD SHEET 2/3
  • Page 4laser printing Printing method change of MDI keys DRAW. NO.  CUST. Edit Date Design Description FANUC LTD SHEET 3/3