1. Fanuc
  2. FANUC Series 30i-A/31i-A5 Nano Smoothing for 5-Axis Machining

FANUC Series 30i-A/31i-A5 Nano Smoothing for 5-Axis Machining Additional Manual Page 1

Additional Manual
1
/
7
Ed.
Apprv.
Person
Date
Person
Contents
Date
2005.06.20
Name No.
FANUC Series 30i-A/31i-A5
Nano smoothing for 5-axis machining
A
-79964E
Page
FANUC LTD.
FANUC Series 30i-A/31i-A5
Nano smoothing
for 5-axis machining
SPECIFICATIONS
Previous page
Next page

Contents Summary of FANUC Series 30i-A/31i-A5 Nano Smoothing for 5-Axis Machining Additional Manual

  • Page 1FANUC Series 30i-A/31i-A5 Nano smoothing for 5-axis machining SPECIFICATIONS Name FANUC Series 30i-A/31i-A5 Nano smoothing for 5-axis machining No. A-79964E Ed. Date Person Contents FANUC LTD. Page 1/7 Date 2005.06.20 Person Apprv.
  • Page 2CONTENTS OVERVIEW ..................................................................................................................................................... 3 FORMAT ...........................................................................................................................
  • Page 3Overview When a desired sculptured surface is approximated by minute segments, Nano smoothing function generates a smooth curve inferred from the programmed segments and performs necessary interpolation. In the conventional Nano smoothing, only the three basic axes (X, Y, and Z) or their parallel ax
  • Page 4Format FORMAT G5.1 Q3 Xp0 Yp0 Zp0 α0 β0 ; : Nano smoothing for 5-axis machining G5.1 Q0 ; : Nano smoothing for 5-axis machining cancel EXPLANATION Xp : X-axis or an axis parallel to the X-axis Yp : Y-axis or an axis parallel to the Y-axis Zp : Z-axis or an axis parallel to the Z-axis α, β : Rotary a
  • Page 5Explanation Nano smoothing for 5-axis machining Three basic axes (and their parallel axes) and two rotary axes are interpolated independently in Nano smoothing for 5-axis machining. Smoothing on XYZ space G5.1 Q3 X0 Y0 Z0 B0 C0; Z X_ Y_ Z_ B_ C_; Y : Command point X X_ Y_ Z_ B_ C_; … Smoothing on BC
  • Page 6Making a decision on the basis of the spacing between adjacent programmed points, Making a decision at a corner Only three basic axes (or their parallel axes) are related to “the programmed block length” in “Conditions to enable Nano smoothing” of explanation for Nano smoothing, and two rotary axes
  • Page 7Alarms Nano smoothing for 5-axis machining can be used together with Tool center point control for 5-axis machining (type I: G43.4). However PS5421 alarm (ILLEGAL COMMAND IN G43.4/G43.5) occurs if Nano smoothing for 5-axis machining is used with Tool center point control for 5-axis machinig (type II