Element of Decomposition of Oil Mist for Fanuc Laser C Series Additional Manual Page 1

Additional Manual
TECHNICAL REPORT(MANUAL) NO. TML 03/003E
Date 24 June, 2003
General Manager of
Laser Laboratory
The modification for improvement of reliability
and maintainability
1. Communicate this report to:
Your information only
GE Fanuc-N, GE Fanuc-E
FANUC Robotics
MILACRON
Machine tool builder
Sales agency
End user
2. Summary for Sales Documents
3. Notice
This report announces the improvement reliability and maintainability parts in laser C series
Please confirm the price of these parts as maintenance parts or as additional parts for a shipped
laser.
4. Attached Document
Drawing
NO.
A81053E034
A81053E035
A81053E037
IDE
Original section of issue
Vice-General
Manager
Department
Manager
Person in
Charge
FANUC

Contents Summary of Element of Decomposition of Oil Mist for Fanuc Laser C Series Additional Manual

  • Page 1TECHNICAL REPORT(MANUAL) NO. TML 03/003E Date 24 June, 2003 General Manager of Laser Laboratory The modification for improvement of reliability and maintainability 1. Communicate this report to: ○ Your information only ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics MILACRON ○ Machine tool builder Sales age
  • Page 2ELEMENT OF DECOMPOSITION OF OIL MIST for FANUC LASER C series 1.Outline The Element of Decomposition of Oil Mist that decomposes oil mist in resonator is added to the C1000-E,C2000-E and C4000-E to decrease the resonator mirror pollution, and to extend the mirror cleaning cycle. Please maintain the
  • Page 33.Order Parts ①In case of addition newly C4000-E C2000-E C1000-E Specification Q'ty Specification Q'ty Specification Q'ty Elem. of Decompos. A290-4540-V170 2 A290-4523-V170 2 A290-4523-V170 2 of Oil Mist A98L-0001-0619 O-ring JB-OR4D-G45 2 JB-OR4D-G45 2 2 #2031 Sticker A370-1146-0575 1 A370-1146-057
  • Page 45.Procedure of additon of the Element of Decomposition of Oil Mist newly. (C4000-E) ① Get the mode barn of laser beam before exchange or installation of the Element of Decomposition of Oil Mist. ② Stop the cooling water by not only shut down of electrical power but shut off the valve of water line.
  • Page 58.About the display which shows that the Element of Decomposition of Oil Mist has already been applied. The sticker (Figure 4) shows that the Element of Decomposition of Oil Mist and other parts for enhancement of reliability and maintainability are installed in the oscillator. And it is pasted in t
  • Page 69.Exchange of the Element of Decomposition of Oil Mist ・The life of the Element of Decomposition of Oil Mist is approx.10000 hours. Please exchange every 10000 hours. ・The Element of Decomposition of Oil Mist(C1000-E:A290-4514-V170,C2000-E:A290-4523-V170,C4000-E:A290-4540-V170) is adjusted a center