Contents Summary of FS 16-LB, 16i-LA, 16i-LB, External Power Control Function Specifications Additional Manual
Page 1FANUC Series 16-LB, 16i-LA, 16i-LB (4) External Power Control Function Specifications 04 Dec 05, 2002 Add. Model on Page 1 Add. New circuit and S/N on Page 3 03 Apr 25, 1995 Revision of Figure on Page 4 Add. Parameter on Page 5 02 Apr 7, 1995 Revision of description on Page 2-5 01 Mar 9, 1995 Newly
Page 21. General The switching of the laser power, which is turned on by CNC, is possible by feeding the external on/off signal to the interface PCB of the laser oscillator. Using this function, the external control of the laser power can be performed introduc ing the pulse train signal, which is controll
Page 3(4) The receiver circuit of the external signal and recommended parameters are shown below. And laser oscillator S/N that this circuit is installed is shown on the right side. Specifications of this IF PCB are A16B-2100-0140 and -0141. CN5#07 EXTP - + CN5#08 EXTN Fig.2 Receiver for External Pulse tr
Page 42.2 Function (1) Outline When the external power control trigger signal (EPC) is "1", the CNC, provided that it can undergo the external power control, accepts this signal and is set EXTERNAL POWER CONTROL MODE. In this mode, the feedback power control is disabled and so is the monitoring of the ala
Page 5* Pulse duty/frequency override (automatically disabled) * Edge cutting/start up function (pulsing disabled) * Conventional power control function (pulsing disabled) (3) Signals External power control trigger signal EPC [Classification] Input signal [Function] The external power control mod