Change of the specification of Analog input board for FANUC Series 16i/160i-LA Additional Manual Page 1
Additional Manual
TECHNICAL REPORT (MANUAL) NO.TMN 05/ E
Date 3 Oct. 2005
General Manager of
CNC Laboratory
Change of the specification of Analog input board for FANUC Series 16i/160i-LA
1. Communicate this report to :
○
Your information
○
GE Fanuc-N, GE Fanuc-E
FANUC Robotics
MILACRON
○
Machine tool builder
Sales agency
End user
2. Summary for Sales Documents
3. Notice
4. Attached Document ： Export Control （ Ye s
No )
Drawing
No.
A-76081-018EN Edition 01 (1/1 ~ 1/1)
ADE 受付
Original section of issue
Vice General
Manager
Department
Manager
Section
Manager
Person in
Charge
Contents Summary of Change of the specification of Analog input board for FANUC Series 16i/160i-LA Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) NO.TMN 05/ E Date 3 Oct. 2005 General Manager of CNC Laboratory Change of the specification of Analog input board for FANUC Series 16i/160i-LA 1. Communicate this report to : ○ Your information ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics MILACRON ○ Machine tool builder Sales ag
- Page 2Change of the specification of Analog input board for FANUC Series 16i/160i-LA Abstract In FANUC Series16i/160i-LA, FANUC will apply the new Analog input board to systems provided from October 2005, because an IC mounted on the former Analog input board cannot be provided by the manufacturer. It is