B-63983EN/02 10.STEP SEQUENCE FUNCTION
- 1011 -
(e) [SEARCH] Program search
Searches for a program.
When you press the [SEARCH] soft key after entering a
program name or symbol name, the program corresponding
to the entered character string is searched for. If you press
the [SEARCH] soft key without entering any character
string, the program corresponding to the last successfully
found character string is searched for again.
If "NO" is set for "WRAP SEARCH ENABLED"
(Subsection 10.6.5, "Setting the Step Sequence Diagram
Screen"), the search operation ends when the end of the
step sequence program is reached. If "YES" is set, the
processing returns to the start to continue search operation.
(4) Moving to a higher hierarchical level
When you press the [BACK] soft key after moving the cursor to
the hierarchy information area of the subprogram list, the screen
display moves to the specified higher hierarchical level. In this
case, the information below that level is lost.
10.6.7 Setting Subprogram List Screen
The method of setting the subprogram list display screen is the same
as for the program list display screen.
For details of the setting screen, see Subsection 8.1.1, "Setting
Program List Screen".
10.6.8 Ladder diagram monitor screen
The ladder diagram display screen is displayed by pressing the
[ZOOM] soft key when the cursor is placed on a ladder subprogram
on the program list screen, subprogram list screen, or step sequence
display screen.
This screen is the same as the screen described in Section 8.2, "
MONITORING LADDER DIAGRAMS ([LADDER] SCREEN) ".
For details of the screen, see Section 8.2.
10.6.9 Collective monitor screen
This screen is the same as the screen described in Subsection 8.4.2,
"COLLECTIVE MONITOR Function". For details of the screen, see
Subsection 8.4.2.
If you use the function for jumping to a ladder net with the [JUMP]
soft key on the selection monitor screen, step sequence display
hierarchy information is lost.