Series 30i/ 31i/ 32i-MODEL A
PMC Supplemental Programming Manual
01 04.09.30
S. Hasegawa
New registration
B-63983EN/02-2
EDIT
DATE
DESIG.
DESCRIPTION
39/56
DRAW.NO.
3.4 DISPLAY FORMAT FOR PARAMETERS
Replace the "8.2.3 Display Format for Parameters" with follows
The following table shows all monitor formats for each parameter of each
functional instruction.
NOTE
1 "Variable" in "Monitor format" field means that this
parameter changes its size according to the other
parameter. See the descriptions for each functional
instruction for detail.
2 Functional instruction with "*" mark has Data table.
No. Name Parameter Monitor format No. Name Parameter Monitor format
1 END1 − − 18 XMOV 1 constant
2 END2 − − 2 4-digits BCD
3 TMR 1 special 3 4-digits BCD
4 DEC 1 2-digits BCD 4 4-digits BCD
2 constant 19 ADD 1 constant
5 CTR 1 special 2 4-digits BCD
6 ROT 1 constant 3 4-digits BCD
2 4-digits BCD 4 4-digits BCD
3 4-digits BCD 20 SUB 1 constant
4 4-digits BCD 2 4-digits BCD
7 COD * 1 constant 3 4-digits BCD
2 2-digits BCD 4 4-digits BCD
3 4-digits BCD 21 MUL 1 constant
8 MOVE 1 constant 2 4-digits BCD
2 constant 3 4-digits BCD
3 2-digits HEX 4 4-digits BCD
4 2-digits HEX 22 DIV 1 constant
9 COM 1 constant 2 4-digits BCD
10 JMP 1 constant 3 4-digits BCD
11 PARI 1 1-byte binary 4 4-digits BCD
14 DCNV 1 no monitor 23 NUME 1 constant
2 no monitor 2 4-digits BCD
15 COMP 1 constant 24 TMRB 1 special
2 4-digits BCD 2 constant
3 4-digits BCD 25 DECB 1 constant
16 COIN 1 constant 2 variable binary
2 4-digits BCD 3 constant
3 4-digits BCD 4 2-digits HEX
17 DSCH 1 constant 26 ROTB 1 constant
2 4-digits BCD 2 variable binary
3 4-digits BCD 3 variable binary
4 4-digits BCD 4 variable binary
5 variable binary