Series 30i/31i/32i-MODEL A
PMC Supplemental Programming Manual
01 05.6.30
H. Yonekura
New registration
B-63983EN/02-6
EDIT
DATE
DESIG.
DESCRIPTION
31/68
DRAW.NO.
+46 Magazine number
(2 bytes)
+48 Pot number
(2 bytes)
+50 Tool geometric compensation
number G
(2 bytes)
* for lathe or compound system
+52 Tool wear compensation
number W
(2 bytes)
* for lathe or compound system
+54 Tool geometory number GNO
(2 bytes)
* The option "Tool management function
(oversize tools supported)" is needed.
+56 Edge group number
(2 bytes)
* When the function "Tool management function
for multi edge tools" is enabled.
+58 Edge number
(2 bytes)
* When the function "Tool management function
for multi edge tools" is enabled.
+60 (reserved)
(14 bytes)
+74 Customized data 1
(4 bytes)
~ ~
+86
+89
Customized data 4
(4 bytes)
This item is end of data when the data length is
76.
~ ~ ~
+150
+153
Customized data 20
(4 bytes)
This item is end of data when the data length is
140.
~ ~ ~
+230
+233
Customized data 40
(4 bytes)
This item is end of data when the data length is
220.