4.LADDER LANGUAGE B-63983EN/02
- 332 -
Parameters
(a) Format specification
Specifies data length (1, 2, or 4 bytes).
Use the first parameter digit to specify byte length:
0001: Binary data of 1 byte length
0002: Binary data of 2 byte length
0004: Binary data of 4 byte length
When setting format specification in the following extended
format, NUMEB can define all the set constants simultaneously in
an array having nn elements.
Specify data length (1, 2, or 4) to the 1st digit as above-mentioned.
Specify the number of the array in which is a constant to the 2nd
and 3rd digit is defines.
Specify 0 to the 4th digit.
0nn1: In case of defining multiple (nn) data by 1 byte length
0nn2: In case of defining multiple (nn) data by 2 byte length
0nn4: In case of defining multiple (nn) data by 4 byte length
The n is the numerical value from 02 to 99. When setting 00 or 01,
it works as the basic specification that works for one data.
Format specification (extended specification):
0nnx
The byte length setting of constant
1: 1 byte length
2: 2 byte length
4: 4 byte length
Number of data in the array
00-01 :
It defines constant at 1 memory.
02-99 :
It defines constants at multiple (nn) memory.
(b) Constant
Defined constants in decimal format. Set a constant data within
the effective range for the byte length which is set in above (a).
(c) Constant output address
Specifies the address of the area for output of the binary data. The
memory of the number of bytes which is set in above (a) is
necessary.
When setting format specification in the extended format, it is
necessary to reserve memory of (byte length) × (number of array
elements which define constant) which was set in above (a).