B-63983EN/02 7.PMC DIAGNOSIS AND MAINTENANCE SCREENS ([PMC MAINTE])
- 683 -
Soft keys on the DATA TABLE CONTROL screen
Display mode switching
Switching to the soft keys for parameter setting
Group number search
Input of the number
of groups
Data table control data initialization
Switching to the zoom screen
Soft keys for parameter setting
Soft keys for data size setting
Symbol display
switching
Setting for signed decimal
Setting for unsigned
decimal
Setting for hexadecimal
Setting for BCD Protection state modification
Setting for byte
Setting for word
Setting for bit
ddress displa
switching
PMC path switching
Switching to the soft keys for data size
setting
Setting for double word
Fig. 7.3.4 (a) Soft keys on the DATA TABLE CONTROL screen
Operations using the soft keys
(a) [SWITCH] Display mode switching
Switches the display mode.
(b) [ZOOM] Switching to the zoom screen
Switches the screen display to the DATA TABLE screen.
(c) [G.CONT] Input of the number of groups
By pressing this soft key after inputting the number of
groups, the number of groups on the data table can be set.
(d) [NO.SRH] Group number search
By pressing this soft key after inputting a group number, the
cursor can be moved to the specified group.
(e) [SYMBOL] Symbol display switching
Displays the symbol of the start address of a data table in
the ADDRESS column.
This soft key is valid only for address display.