B-63983EN/02 7.PMC DIAGNOSIS AND MAINTENANCE SCREENS ([PMC MAINTE])
- 743 -
7.4.33 Deleting One or All FLOPPY Files
A specified file or all files on a Floppy Cassette or Handy File
connected via RS-232C can be deleted. To use this function, perform
the operation described below on the I/O screen. To set the
communication parameters, display the port setting screen by pressing
the [PORT SETING] soft key. For details of the port setting screen,
see Subsection 7.4.2.
Deleting a specified file on the FLOPPY
(1) On the I/O screen, make the following settings with the query
selection cursor and option selection cursor:
Query Setting
DEVICE FLOPPY
FUNCTION DELETE
(2) Specify a file to be deleted, by performing the following
operations:
· Move the query selection cursor to FILE NO., then key in the
number of a file to be deleted. At this time, the FILE NAME
field displays the file name corresponding to the entered file
number.
· Move the query selection cursor to FILE NAME, then key in
the name of the file to be deleted.
· Switch the screen display to the list screen, then select the file
to be deleted.
For the list screen, see Subsection 7.4.3.
NOTE
If a value is set in the FILE NO. field, and a file
name not corresponding to the file number is
entered in the FILE NAME field when FILE NO. and
FILE NAME are displayed at the same time, the
value set in the FILE NO. field is erased, and the
setting in the FILE NAME field becomes valid.
(3) Press the [EXEC] soft key to delete the file.
Press the [CANCEL] soft key to stop the operation.