B-63983EN/02 7.PMC DIAGNOSIS AND MAINTENANCE SCREENS ([PMC MAINTE])
- 761 -
7.6.6 Trace Result Output
If trace result data is present when a trace operation has been executed,
the data can be output to the memory card. Output trace result data
can be input to application software such as spreadsheet software run
on the personal computer. For the method of input, refer to the
relevant manual of application software.
(1) Operation
Press the [PUNCH] soft key. The soft key display changes to
[EXEC] and [CANCEL]. Press the [EXEC] soft key to start
output. Upon completion of output, the soft key display returns
to the initial status on the signal trace result screen.
(2) File name
The name of an output file is PMCTRACE.000. If a file with the
same name exists on the memory card, the extension is
incremented to PMCTRACE.001, PMCTRACE.002, and so on
(up to PMCTRACE.999).
(3) Output format
Trace result data is output in the text format. Character string
data items such as item names and setting names are enclosed in
quotation marks (').
Output data is divided into four major blocks: a header, data of
the first parameter setting page, data of the second parameter
setting page, and trace result data.
(a) Header
At the start of data, an identifier representing the type of
data and edition information are output.
Identifier: ('PMC TRACE DATA')
Edition information: ('Edition', 1)
(b) Data of the first parameter setting page
identifier, , ,
setting-number, setting-item-name, setting, setting-character-string
setting-number, setting-item-name, setting, setting-character-string
setting-number, setting-item-name, setting, setting-character-string
setting-number, setting-item-name, setting, setting-character-string
:
:
· identifier Character string data
The character string 'Setting' is output.