8.LADDER DIAGRAM MONITOR AND EDITOR SCREENS ([PMC LADDER]) B-63983EN/02
- 816 -
WARNING
You have to pay special attention to modify running
LADDER program. If you modify LADDER program
in wrong way, or update LADDER program with the
machine in improper status, it may cause
unexpected reaction of the machine. You have to
make it sure that modifications you make on
LADDER program is appropriate, machine is in
proper status, and nobody is near the machine,
when you update LADDER program.
(n) [RESTRE] Abandon changes
Abandons all changes, and restores LADDER program to
the one at entering LADDER DIAGRAM EDITOR screen,
or last updated one using [UPDATE] soft key. This soft
key is useful when you make wrong modifications and hard
to recover from them.
(o) [SCREEN SETING] Screen settings
Goes to setting screen for LADDER DIAGRAM EDITOR
screen. You can change various settings for LADDER
DIAGRAM EDITOR screen at the screen. Use "EXIT" soft
key to return to LADDER DIAGRAM EDITOR screen.
(p) [RUN]/[STOP] Run and stop LADDER program
Controls LADDER program execution. [RUN] soft key
makes LADDER run, and [STOP] soft key makes
LADDER stop. If changes are reflected normally, the
LADDER program as edited will be executed at that point.
WARNING
You have to pay special attention to run/stop
LADDER program. Running/stopping LADDER
program in a wrong timing, or with machine in
improper status, may cause unexpected reaction of
machine. You have to make it sure that machine is
in proper status, and nobody is near the machine
when you run/stop LADDER program.
(q) [CANCEL EDIT] Abandon editing
Abandons all changes, and restores LADDER program to
the one at entering LADDER DIAGRAM EDITOR screen,
or last updated one using [UPDATE] soft key. Switches to
LADDER DIAGRAM MONITOR screen.