B-63983EN/02 9.PMC CONFIGURATION DATA SETTING SCREENS ([PMC CONFIG])
- 915 -
Fig. 9.6 Soft keys on the PMC STATUS screen
Operation using the soft key
(1) [SWITCH PMC] Change the PMC
Changes the target PMC for display and operation on each screen.
You can check the position of the cursor displayed at the title
information of each PMC to know the current target PMC.
(2) [RUN]/[STOP] Start and stop a ladder program
For details of these operations, see Subsection 9.6.1.
CAUTION
When the programmer protection function is
enabled, the [RUN]/[STOP] soft key appears and is
available. For details, see Section 6.2.
Soft keys on the PMC STATUS screen
Change the PMC
Start and stop a ladder program