B-63983EN/02 9.PMC CONFIGURATION DATA SETTING SCREENS ([PMC CONFIG])
- 919 -
Fig. 9.7.1 PARAMETERS FOR ONLINE MONITOR screen
EMG STOP: Terminates communication forcibly. Use this key if
communication becomes abnormal and the connection
cannot be terminated normally.
INIT: Initializes the parameters to their default values.
CAUTION
In case of configuration of CNC with which neither
Ethernet nor HSSB is available, the item of "HIGH
SPEED " is not displayed.
(a) Case of connection by RS-232C (FANUC LADDER-III)
(i) Check that "NOT USE" is selected at the "RS-232C"
item.
(ii) Set the parameter of "CHANNEL" and "BAUD
RATE".
(iii) Move the cursor to the "RS-232C" item with Up or
Down Cursor key.
(iv) Select "USE" with Left or Right Cursor key.
(b) Case of connection by Ethernet (FANUC LADDER-III,
Ladder Editing Package)
(i) Move the cursor to the "HIGH SPEED" item with Up
or Down Cursor key.
(ii) Select "USE" with Left or Right Cursor key.