
B–63505EN/02
1. DISPLAY AND OPERATION
87
If an alarm is issued during operation, the group number of the slave
causing the alarm is indicated at the right end of the message field on the
screen. Check the details on the alarm screen. For example, (13) means
that the first and third power motion units are in the alarm state.
1. Press the [MSG] function selection soft key. Just the error code is
displayed on the screen.
POWER MATE CNC MANAGER
ALARM
1.GROUP0 / β
442 210 232
[ POS ][ ][ ][SYSTEM ][ MSG ]
Up to forty codes can be displayed on the screen.
For details of the alarm, refer to the connection manual of the
corresponding Power Mate.
The active slave is subjected to the ZOOM function, which will be
described later, and parameter overwrite. The title of the active slave is
displayed in a color different from the display color of the other slave
titles.
The active slave can be selected by pressing the [±NEXT] or [°BACK]
soft key, which is displayed after the continuous menu key
is
pressed several times.
[±NEXT]: Displays the screen of the Power Mate connected after the
currently active slave. The equipment other than the Power
Mate is ignored.
[°BACK]: Displays the screen of the Power Mate connected before the
currently active slave.
D Alarm screen
D Operating the active
slave