
3. INPUT AND OUTPUT OF DATA
B–63505EN/02
142
Offset data can be input and output using the ALL IO screen.
Inputting offset data
1 Press soft key [OFFSET] on the ALL IO screen, described in Subsec.
3.3.1.
2 Select EDIT mode.
3 Press soft key [(OPRT)]. Soft keys change as shown below.
READ PUNCH
4 Press soft key [READ], then [EXEC].
The offset data is read, and the “INPUT” indicator blinks at the
lower–right corner of the screen.
Upon the completion of input, the “INPUT” indicator is cleared from
the screen.
To cancel input, press soft key [CAN].
Outputting offset data
1 Press soft key [OFFSET] on the ALL IO screen, described in Subsec.
3.3.1.
2 Select EDIT mode.
3 Press soft key [(OPRT)]. Soft keys change as shown below.
READ PUNCH
4 Press soft key [PUNCH], then [EXEC].
The offset data is output, and the “OUTPUT” indicator blinks at the
lower–right corner of the screen. Upon the completion of output, the
“OUTPUT” indicator is cleared from the screen.
To cancel output, press soft key [CAN].
3.3.4
Inputting and
Outputting Offset Data
Procedure
EXECCAN
Procedure
EXECCAN