
1. DISPLAY AND OPERATION
B–63505EN/02
54
ACTUAL POSITION (ABSOLUTE) O1000 N00010
X 217.940
Y 363.233
Z 0.000
PART COUNT 5
RUN TIME 0H15M CYCLE TIME 0H 0M38S
ACT.F 3000MM/M S 0 T0000
MEM STRT MTN *** 09:06:35
[ ABS ] [ REL ] [ ALL ] [ HNDL ] [ OPRT ]
· Indicates the current status of the CNC.
· Display example and explanation
MEM STRT MTN *** 09:06:35
(1) (2) (3) (4) (7) (8)
(5)
(1) Mode selection status
MEM: Automatic operation (memory operation)
MDI: Manual data input/MDI operation
EDIT: Program editing
RMT: Remote operation
JOG: Jog feed
REF: Reference position return
INC: Incremental feed mode = step feed (if no manual pulse
generator is available)
HND: Manual handle feed mode
TJOG: TEACH IN JOG (Teaching in jog feed mode)
THND:TEACH IN HANDLE (Teaching in handle feed mode)
(2) Automatic operation status
STRT: Automatic operation has started (and program execution is
under way).
HOLD:Automatic operation has been suspended (execution of a
block has been discontinued, and automatic operation has
stopped).
STOP: Automatic operation has stopped (a block has been finished,
and automatic operation has stopped).
****: Other status (when the power is switched on, or automatic
operation has ended)
(3) Automatic operation status
MTN: Program–specified axis movement is under way.
DWL: Program–specified dwell command (G04) is being executed.
***: Other status
1.9
CNC STATE DISPLAY