
3.1.4 Restore Procedure using Ghost Cast Server
.1.4.1 Restore: Settings on Server-side
ve to be entered:
LOAD TO CLIENTS: For a Restore, this option has to be selected.
With this procedure, Image files created with the GhostCast Server program can be send back to a
client i.e. when the Hard disk drive has been exchanged on the client computer. The procedure is
similar like the data backup and can be easily set-up. The same Boot-disk or USB memory stick is
used to recover the client computer (Panel i).
3
On the Server-side the Ghost Cast Server program has to be started. The screen shots below
show the settings on the Server-side:
Figure 61: Ghost Cast Server: Setting for Data Restore
In the main screen of the Ghost Cast Server following settings ha
SESSION NAME: In the test: Session2
This name can be freely defined. However, this setting is case-sensitive. If upper case is inputted
on the server, upper case has to be inputted on the client-side as well.
File Name: Backup_Guidance_EN21.doc
Created by: Olaf Sklepik on 20-Apr-05
Approved by: n/a
Page 67 of 72