B-64120EN/01 4.DESCRIPTION OF PARAMETERS
- 165 -
#7 #6 #5 #4 #3 #2 #1 #0
3232 ND9 ND8
[Data type] Bit
ND8 While program No. 8000 to 8999 is being executed as a subprogram
or macro program, display on the program screen is:
0 : Not disabled.
1 : Disabled.
ND9 While program No. 9000 to 9999 is being executed as a subprogram
or macro program, display on the program screen is:
0 : Not disabled.
1 : Disabled.
3241
Character blinking in the AI advanced preview control mode or AI contour
control mode (first character)
3242
Character blinking in the AI advanced preview control mode or AI contour
control mode (second character)
3243
Character blinking in the AI advanced preview control mode or AI contour
control mode (third character)
3244
Character blinking in the AI advanced preview control mode or AI contour
control mode (fourth character)
3245
Character blinking in the AI advanced preview control mode or AI contour
control mode (fifth character)
3246
Character blinking in the AI advanced preview control mode or AI contour
control mode (sixth character)
3247
Character blinking in the AI advanced preview control mode or AI contour
control mode (seventh character)
[Data type] Byte
[Valid data range] 0 to 255
Set the character codes of characters blinking in the AI advanced
preview control mode or AI contour control mode.
NOTE
1 Set character codes according to the character
code list in Appendix A.
2 If 0 is set, "AICC" blinks when the AI contour
control option is provided, and when the option is
not provided, "AIAPC" blinks.