
4.DESCRIPTION OF PARAMETERS B-64120EN/01
- 340 -
4.43 PARAMETERS OF POLYGON TURNING
#7 #6 #5 #4 #3 #2 #1 #0
PLZ PQE
7600
[Data type] Bit
PQE The specification range of the rotation ratio for polygon turning
0 : P=1 to 9, Q=-9 to -1, 1 to 9
1 : P=1 to 999, Q=-999 to -1, 1 to 999
PLZ Synchronous axis using G28 command
0: Returns to the reference position in the same sequence as the
manual reference position return.
1: Returns to the reference position by positioning at a rapid
traverse.
The synchronous axis returns to the reference position in the
same sequence as the manual reference position return when no
return-to-reference position is performed after the power is
turned on.
#7 #6 #5 #4 #3 #2 #1 #0
PLR SBR
7603
[Data type] Bit
SBR For spindle synchronization, speed ratio control is:
0 : Disabled.
1 : Enabled.
NOTE
1 This parameter is used to set the slave spindle
speed to a multiple of the master spindle speed
when the spindle synchronization function is used.
2 This parameter is not related to the polygon turning
function.
3 The spindle synchronization option is needed.
4 Parameter Nos. 7635 and 7636 also need be set
up.
PLR The machine coordinates of a tool axis for polygon turning are:
0 : Rounded by the setting in parameter 7620.
1 : Rounded by 360° (or the setting in parameter No. 1260 when bit
0 (ROA) of parameter No. 1008 is set to 1).