
B-64120EN/01 4.DESCRIPTION OF PARAMETERS
- 39 -
Set the maximum number of axes that can be controlled by the CNC.
Examples
Suppose that the first axis is the X axis, and the second and
subsequent axes are the Y, Z, and A axes in that order, and that
they are controlled as follows:
X, Y, and Z axes: Controlled by the CNC
A axis: Controlled by the PMC
Then set this parameter to 3 (total 3: 1st to 3rd axes)
With this setting, the fourth axis (A axis) is controlled only by
the PMC, and therefore cannot be controlled directly by the
CNC.