Change of the Specification of 3MB SRAM Module in S16i/18i/160i/180i/160is/180is-MODEL A and S15i-MODEL A/B Additional Manual Page 1
Additional Manual
TECHNICAL REPORT (MANUAL) NO.TMN 05 /115E
Date 25 Nov., 2005
General Manager of
CNC Laboratory
Change of the specification of 3MB SRAM module in
S16i/18i/160i/180i/160is/180is-MODEL A and S15i-MODEL A/B
1. Communicate this report to:
Your information
GE Fanuc-N, GE Fanuc-E
FANUC Robotics
CINCINNATI MILACRON
Machine tool builder
Sales agency
End user
2. Summary for Sales Documents
3. Notice
4. Attached Document: Export Control ( Yes No )
Drawing No. A-73123EN-096 Edition 01 ( 1 pages)
No.CLB1-05/B229
25 Nov., 2005
Order section of issuer of issue
ADE V.G.M. Manager Chief
Person in charge
Contents Summary of Change of the Specification of 3MB SRAM Module in S16i/18i/160i/180i/160is/180is-MODEL A and S15i-MODEL A/B Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) NO.TMN 05 /115E Date 25 Nov., 2005 General Manager of CNC Laboratory Change of the specification of 3MB SRAM module in S16i/18i/160i/180i/160is/180is-MODEL A and S15i-MODEL A/B 1. Communicate this report to: Your information GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI
- Page 2Change of the specification of 3MB SRAM module in S16i/18i/160i/180i/160is/180is-MODEL A and S15i-MODEL A/B Abstract In FS16i/18i/160i/180i/160is/180is-MODEL A and FS15i-MODEL A/B, FANUC will apply a new 3MB SRAM module to systems provided from September 2005. Because FANUC adopt the ECC check funct