Contents Summary of Connector support for elbow type plug connector Additional Manual
Page 1TECHNICAL REPORT (MANUAL) No. TMS02/012E Date March 7, 2002 General Manager of Servo Laboratory Connector support for elbow type plug connector 1. Distribute this report to the destinations marked with O : O Your information O GE Fanuc-N, GE Fanuc-E O Fanuc Robotics-NA, Fanuc Robotics-E CINCINNATI M
Page 2Connector support 1. Type of applied technical documents Name Connector support Spec. No./ Version A-56731E-0087 2. Summary of change New, Add Applicable Group Name/Outline Correct, Delete date Basic Function Optional Function Unit Maintenance Parts Notice Correction Connector support This connector
Page 33. Specification A06B-6114-K202#E 4. Applicable connector plug FANUC SPECIFICATION A06B-6114-K200#E JAPAN AVIATION ELECTRONICS SPECIFICATION JN1FS10SL1, JN1FS10SL2 5. Note Don’t disconnect feedback connector in attaching the connector support. It is possible to mount this connector support without d
Page 4(2) Mount the reinforcing plate on the cover, and tighten the attached bolts (M4 x 18) with torque from 2.0Nm to 2.5Nm. At this time, it is necessary to touch the reinforcing plate to the connector. Please refer to the figure below. Attached bolts Motor specification for attached bolts is as follows