1. Fanuc
  2. FANUC Series 30i/31i/32i, The Memory Protection Signal for CNC Parameter

FANUC Series 30i/31i/32i, The Memory Protection Signal for CNC Parameter Additional Manual Page 1

Additional Manual
A-90150E
Title
1/3
page
FANUC Series 30i /31i /32i
The memory protection signal for
CNC parameter
Ed.
Date
Design
Description
Apprv.
Design.
Date
Nov.21.’05
Draw
No.
FANUC Series 30i /31i /32i
The memory protection signal for
CNC parameter
Specifications
Previous page
Next page

Contents Summary of FANUC Series 30i/31i/32i, The Memory Protection Signal for CNC Parameter Additional Manual

  • Page 1FANUC Series 30i /31i /32i The memory protection signal for CNC parameter Specifications FANUC Series 30i /31i /32i Title The memory protection signal for CNC parameter Draw No. A-90150E Ed. Date Design Description page 1/3 Date Nov.21.’05 Design. Apprv.
  • Page 2Overview By using this function, the “Enable” or “Disable” setting of “Parameter write” can be set by the signal. The switch of enable or disable of this function is set by the parameter PKY(No.3299#0), and the switch of enable or disable setting of input parameter is set by the signal KEYP.
  • Page 3#7 #6 #5 #4 #3 #2 #1 #0 8900 PWE [Input type] Setting input [Data type] Bit system common #0 PWE The setting, from an external device and MDI panel, of those parameters that cannot be set by setting input is : 0: Disabled. 1: Enabled. NOTE This parameter is effective when the parameter PKY(No.3299#0