
B–62444E–1/04
13. SETTING DATA
OPERATION
211
Detailed cutting conditions can be specified by setting coefficients.
Pressing the [8] ([7] soft key if the C–axis graphic conversation function
is not provided) soft key on the tool data menu screen displays the cutting
condition data screen for specifying coefficients.
To display the screen for specifying coefficients for each tool material,
press the
page key.
(1) Coefficients for general–purpose tools
The cutting speed can be increased or decreased according to the range of
the feed amount required for finish machining for each workpiece
material.
Example of operation to specify coefficients for general–purpose tools)
0.2 INPUT (FEED/REV. 1)
0.4
INPUT (FEED/REV. 2)
0.6
INPUT (FEED/REV. 3)
0.8
INPUT (FEED/REV. 4)
1.667
INPUT (Coefficient 1–1)
1.500
INPUT (Coefficient 1–2)
1.333
INPUT (Coefficient 1–3)
1.200
INPUT (Coefficient 1–4)
1.000
INPUT (Coefficient 1–5)
1.667
INPUT (Coefficient 2–1)
[CAP. :HEAD–L]
<
*** MACHINING CONDITION (COEFIC) ***
FINISHING GENERAL
FEED/REV.
(MM/REV.) 0.20 0.40 0.60 0.80
MATERIAL
FC25 1.667 1.500 1.333 1.200 1.000
FCD45 1.667 0.000 0.000 0.000 0.000
SS41 0.000 0.000 0.000 0.000 0.000
S45C 0.000 0.000 0.000 0.000 0.000
SKD11 0.000 0.000 0.000 0.000 0.000
SUS304 0.000 0.000 0.000 0.000 0.000
AL1 0.000 0.000 0.000 0.000 0.000
AL2 0.000 0.000 0.000 0.000 0.000
(CUT SPD.)
MENU
RETURN
WORK
MATERL
GUIDE
101#L OUTTER T0505 RN 0.400 AC 90 AN 60 TW 20.000
102#R OUTTER T0101 RN 0.400 AC 90 AN 60 TW 20.000
103#R OUTTER T0202 RN 0.400 AC 90 AN 60 TW 20.000
251#L OUTTER TH T0404 RN 0.000 AN 60 TW 40.000
252#R OUTTER TH T0606 RN 0.000 AN 60 TW 40.000
13.2.7
Coefficients