
B–62444E–1/04
2. MACHINING PROGRAMS FOR
LATHES WITH C–AXIS
TYPES OF MACHINING
PROGRAMS
381
(5) Process data screen for C–axis boring
PROC(01) AREA HEAD MACHN–2 PROC–DIA TOOL–NO REV/MIN T–CODE
C–DRILL FACING HEAD–L BORING 20.000 951 800 0505
FEED/MIN DWELL SHIFT INTERVAL
300 1.000 0.500 EQUAL
JORIENT M : M code for spindle orientation (related parameter:
No. 9056, CBRORM)
JSHIFT–DRECT.X: Shift direction (related bit: bit 2 (BSH) of
parameter No. 9765)
Use the [PLSWRD] or [MNSWRD] soft key to
select the direction.
When bit 2 of parameter No. 9765 is set to 0, the
positive direction is selected automatically. When
the bit is set to 1, the negative direction is selected
automatically.
(6) Process data screen for C–axis tapping
PROC(01) AREA HEAD NOMINL–D PITCH TOOL–NO REV/MIN T–CODE
C–TAP FACING HEAD–L 20.000 0.500 651 800 0505
FEED/MIN DWELL INTERVAL
300 1.000 EQUAL