
B–62444E–1/04
A. PARAMETERS
APPENDIX
543
D When T80/T99(V2) is 0
Length of tape used for storage 160m 320m 640m 1280m
NM0NM7=0
Number of processes 115 270 575 999
Length of tape used for NC program
storage
10m 20m 40m 80m
NM0=1
Number of processes 105 250 535 999
Length of tape used for NC program
storage
20m 40m 80m 160m
NM1=1
Number of processes 95 230 495 999
Length of tape used for NC program
storage
30m 60m 120m 240m
NM2=1
Number of processes 85 210 450 940
Length of tape used for NC program
storage
40m 80m 160m 320m
NM3=1
Number of processes 67 125 285 610
Length of tape used for NC program
storage
60m 160m 320m 640m
NM7=1 (V2)
Number of processes ––– ––– ––– 130
Length of tape used for NC program
storage
1100m
#7
1SP9771
#6
2SP
#5
96S
#4
96M
#3
CS2
#2
CLD
#1
DM2
#0
T99
Bit No.
T99 1 : Reaming and boring are enabled, with 99 tools and 24 workpiece
materials registered.
0 : Reaming and boring, with 99 tools and 24 workpiece materials
registered, are disabled.
DM2 Not used.
CLD 1 : Automatic demonstration function II erases a stored procedure for
automatic demonstration operation. The program is erased at the next
power–on. After the program is erased, the parameter is automatically
set to 0.
0 : Automatic demonstration function IIdoes not erase the procedure for
automatic demonstration operation. <Related parameters: Bit 4
(DMO) of No. 9776, bit 2 (CLD) of No.9771>
CS2 1 : Subprogram calling process II is enabled.
0 : Subprogram calling process II is disabled.
96M 1 : Spindle positioning control (96 angular subdivisions) of tool post 1
(main spindle) is enabled.
0 : Spindle positioning control (96 angular subdivisions) of tool post 1
(main spindle) is disabled.