
4. DESCRIPTION OF PARAMETERS
B–63610EN/01
12
Setting Description
0, 1 RS–232C serial port 1
2 RS–232C serial port 2
3 Remote buffer interface
4 Memory card interface
5 Data server interface
6 The DNC operation is performed or M198 is specified by FOCAS1/
Ethernet or DNC1/Ethernet.
10 DNC1/DNC2 interface
12 DNC1 interface #2
15 M198 is specified by FOCAS1/HSSB. (Bit 1 (NWD) of parameter
No. 8706) must also be specified.)
16 The DNC operation is performed or M198 is specified by FOCAS1/
HSSB (port 2).
20
21
22
|
34
35
Group 0
Group 1
Group 2
|
Group 14
Group 15
Data is transferred between the CNC and a Power
Mate in group n (n: 0 to 15) via the FANUC I/O Link.
Supplemental remark 1
If the DNC operation is performed with FOCAS1/HSSB, the setting
of parameter No. 20 does not matter. The DMMC signal <G042.7>
is used.
Supplemental remark 2
If bit 0 (IO4) of parameter No. 110 is set to control the I/O channels
separately, the I/O channels can be divided into four types: input and
output in the foreground and input and output in the background. If
so, parameter No. 20 becomes a parameter for selecting the input
device in the foreground.