
4. DESCRIPTION OF PARAMETERS
B–63610EN/01
320
#7
IPC7501
#6
IT2
#5
IT1
#4
IT0
#3 #2 #1 #0
[Data type] Bit
IT0, IT1, IT2
IT2 IT1 IT0 Interpolation of G05 data (ms)
0 0 0 8
0 0 1 2
0 1 0 4
0 1 1 1
1 0 0 16
IPC
0 : The system does not monitor whether a distribution process is
stopped with high–speed remote buffer A or B.
1 : The system monitors whether a distribution process is stopped with
high–speed remote buffer A or B.
(P/S alarms 179 and 000 are simultaneously issued if the distribution
process is stopped. In this case, the power must be turned off then on
again.)
NOTE
The distribution process stops, when the host cannot send
data with the high–speed remotebuffer by the specified time.
#7
7502
#6 #5 #4 #3 #2 #1 #0
SUP
[Data type] Bit
SUP In high–speed remote buffering.
0 : Acceleration/deceleration control is not applied.
1 : Acceleration/deceleration control is applied.
4.48
PARAMETERS OF
HIGH–SPEED
MACHINING (HIGH–
SPEED REMOTE
BUFFER)