Change for the Specification of ROM Module Additional Manual Page 1
Additional Manual
TECHNICAL REPORT (MANUAL) NO.TMN 04/119 E
Date 1 Dec., 2004
General Manager of
CNC Laboratory
Change for the specification of ROM module
1. Communicate this report to:
○
Your information
○
GE Fanuc-N, GE Fanuc-E
FANUC Robotics
CINCINNATI MILACRON
○
Machine tool builder
Sales agency
End user
2. Summary for Sales Documents
3. Notice
4. Attached Document
Drawing No. A-73123-095EN Edition 01 (1/1 ~ 1/1)
No.CLB1-04/C006
1 Dec., 2004
Order section of issuer of issue
ADE V.G.M. Manager Chief
Contents Summary of Change for the Specification of ROM Module Additional Manual
- Page 1TECHNICAL REPORT (MANUAL) NO.TMN 04/119 E Date 1 Dec., 2004 General Manager of CNC Laboratory Change for the specification of ROM module 1. Communicate this report to: ○ Your information ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON ○ Machine tool builder Sales agency End user 2. Summa
- Page 2Change for the specification of ROM module Abstract We cannot continue producing the ROM module, which is used rewritable EPROM (UV EPROM), for the system software and the ladder program in FS16/18-MODEL A/B/C and FS15-MODEL B because the memory makers ended to manufacture UV EPROM. Therefore, we co