1. Fanuc
  2. FS 16i/18i/21i-A/B

FS 16i/18i/21i-A/B Additional Manual Page 3

Additional Manual
2002/07/08
Edit
3
/
5
Data Si
g
nature
Descri
p
tion
FANUC Series 16i/18i/21i-A/B
Dual display of CNC screen display function
A
-78625EN
Drawing No.
Title
Page
Ka
g
e
y
ama
1. Outline
In CNC screen display function, screen can be displayed on both PC side and CNC side.
2. Detail
In CNC screen display function, screen can be displayed on both PC side and CNC side.
This function is performed by a parameter NS2(No.3206#7).
2-1. Selection of Key control
The key input can be selected whether to be controlled by CNC side or PC side
according to the DI signal CNCKY (G0295#7).
In case of CNC with touch panel, key input is controlled by pushing left upper corner on
the screen. (When the parameter S2K (No.3206#5) = “1”)
When left upper corner on CNC screen is pushed, CNC MDI key is selected, and when
left upper corner at CNC screen display function on PC is clicked, keyboard of PC is
selected.
The status of key selection is output to DO signal (F0295#7).
2-2. Break request by DI signal
In case that dual display of CNC screen display function, when PC becomes freeze by
some factor, break request of dual display of CNC screen display function can be
activated from CNC side by DI signal C2SEND (G0295#6) .
The status of break request is output to DO signal (F0295#6,F0295#5).
Previous page
Next page

Contents Summary of FS 16i/18i/21i-A/B Additional Manual

  • Page 1FANUC Series 16i/18i/21i-A/B Dual screen of CNC screen display function Specifications Title FANUC Series 16i/18i/21i-A/B Dual display of CNC screen display function Drawing No. A-78625EN Page Edit Data Signature Description 1/5 2002/07/08 Kageyama
  • Page 2Contents 1. Outline ........................................................................................................3 2. Detail...........................................................................................................3 2-1. Selection of Key control...........................
  • Page 31. Outline In CNC screen display function, screen can be displayed on both PC side and CNC side. 2. Detail In CNC screen display function, screen can be displayed on both PC side and CNC side. This function is performed by a parameter NS2(No.3206#7). 2-1. Selection of Key control The key input can b
  • Page 43. Parameter No. #7 #6 #5 #4 #3 #2 #1 #0 3206 NS2 S2K Data type : Bit NS2 Dual display of CNC screen display function is 0: Invalid. 1: Valid. S2K In dual display of CNC screen display function, 0: Key control is selected by DI signal(G0295#7). 1: Key control is selected by pushing at left upper cor
  • Page 54. DI/DO No. #7 #6 #5 #4 #3 #2 #1 #0 G0295 CNCKY C2SEND [Classification] Input signal [Function] CNCKY This signal selects input key for dual display of CNC screen display function 0 : Input is used by PC key. 1 : Input is used by CNC key. C2SEND This signal requests break of dual display of CNC scr
  • Page 65. Notes (1) Fast Ethernet board is needed. (2) PMC-SB6 is needed on F16i/18i/21i-A. PMC-SB7 is needed on F21i-B. (3) Ethernet function and CNC screen display function are needed. (4) Break request is only performed on dual display of CNC screen display function. (5) This function is optional functi