
8.EDITING PROGRAMS OPERATION B-63324EN-1/03
- 288 -
Fig.8.19 (a) Program Text Screen in Teach In Mode
(3) Move the machine to the desired position, using jog, incremental,
or handle feed.
(4) Register or retrieve the number of the program to be edited, and
position the cursor where you want to insert a machine position on
each axis.
(5) Key in an axis address and press the key.
The absolute coordinate position of the entered axis address is
loaded and inserted into the program as an axis command. The
coordinates inserted with this method become absolute command
values.
(Example) Absolute coordinate position X 12.300 (input in mm,
IS-B) X12.300
INPUT