
B-63324EN-1/03 OPERATION 9.SETTING AND DISPLAYING DATA
- 385 -
Setting item name Parameter Setting item display (parameter setting)
TV check TVC(No.0000#0) On (1)/Off (0)
TV (comment) CTV(No.0000#1) On (1)/Off (0)
Input/output code ISP(No.0000#2)
EIA(No.0000#4)
EIA
ISO
ASCII
(#2=0/1 ,#4 =1)
(#2=0 ,#4 =0)
(#2=1 ,#4 =0)
EOB code NCR(No.0000#3) LF CR CR(0)/LF(1)
F.G input device
F.G output device
B.G input device
B.G output device
(No.0020)
(No.0021)
(No.0022)
(No.0023)
RS232-C C1
RS232-C C2
RS232-C C3
Memory card
Remote buffer
RS-422 C1
Data server
Open CNC1
Open CNC2
(1)
(2)
(3)
(8)
(10)
(13)
(14)
(15) (DNC operation interface)
(16) (Upload/download interface)
- Setting RS-232C/RS-422
Set the communication conditions for each channel of RS-232C and
RS-422.
A parameter set specifying a device specification, stop bit, and baud
rate as indicated below is assigned to each channel according to the
device number setting using parameter No. 5001 to No. 5003 and No.
5013.
Parameter set 1 : Parameters (Nos. 5110, 5111, 5112)
Parameter set 2 : Parameters (Nos. 5120, 5121, 5122)
:
:
:
Parameter set 9 : Parameters (Nos. 5190, 5191, 5192)
Setting item name Parameter Setting
Device specification (No.5110,5120,5130)
(No.5140,5150,5160)
(No.5170,5180,5190)
1-8
Stop bit (No.5111,5121,5131)
(No.5141,5151,5161)
(No.5171,5181,5191)
1/2
Baud rate (No.5112,5122,5132)
(No.5142,5152,5162)
(No.5172,5182,5192)
1-12
( 50, 100, 110, 150, 200, 300,
600, 1200, 2400, 4800,
9600, 19200bps)
- [Tip]
A brief description of the setting to which the cursor is positioned is
provided.