B–63835EN/03
1. DISPLAY AND OPERATION
47
By setting bit 4 (PHS) of parameter No. 3206, setting and display on the
operation history signal selection screen can be linked with parameter No.
12801 through No. 12900. By this linking, setting information related to
input and output signals subject to operation history processing can be
input and output in the same way as ordinary parameters.
NOTE
1 A cross (×) indicates that a signal will not be recorded. Also,
any signal for which an address is not specified will not be
recorded, either.
2 A circle (f) indicates that a signal can be recorded.
3 A signal indicated by its symbol name will also be displayed
by its symbol name.
1. M/T addresses
MT→PMC
#7
fX000
#6
f
#5
f
#4
f
#3
f
#2
f
#1
f
#0
f
fX127 f f f f f f f
to
PMC→CNC
#7
fG000
#6
f
#5
f
#4
f
#3
f
#2
f
#1
f
#0
f
fG003 f f f f f f f
fG004 f f f FIN f f f
fG005 f f f TFIN SFIN f MFIN
to
fG006 f f f f *ABS f SRN
RLSOTG007 EXLM *FLUP f f ST STLK f
ERSG008 RRW *SP *ESP f f f *IT
fG009 f f f f f f f
fG013 f f f f f f f
fG014 f f f f f f f
fG015 f f f f f f f
fG018 f f f f f f f
RTG019 f f f f f f f
to
to
D Parameter–based setting
D Input signals and output
signals to be recorded in
the history