
B–63172EN/01
2. LIST OF SPECIFICATIONS
GENERAL
7
Item iHiD2iDSpecifications
External setting function of reference position f f f
Manual handle feed 1 unit f – f
1 unit per path – f –
2 or 3 units l – l
Manual handle feed magnification 1, 10, m, n f f f
Manual handle interrupt f – f
Incremental feed 1, 10, 100, 1000 f f f
Jogging/handle feed mode f f f
External pulse input function Position coder f f f
Interpolation functions
Positioning (Non linear interpolation type) G00 f f f
Positioning (Linear interpolation type) G00 f – f
Exact stop mode G09 f f f
Linear interpolation G01 f f f
Circular interpolation G02, G03 f – f
Dwell For a specified number of seconds f f f
For a specified number of rotations f f f
Polar coordinate interpolation G12.1, G13.1 l – l
Skip function G31 f f f
Skip function from PMC f f f
Dwell skip function f f f
Multi–step skip function G31 P1 to P4 f f f
Reference position return G28 f f f
Return from reference position G29 f f f
Reference position return check G27 f f f
2nd/3rd reference position return G30 f f f
Reference position retract function Signals RTN1n, RTN2n, RTN3n f f f
Feed functions
Rapid traverse Up to 240 m/min (1 µm) f f f
Up to 100 m/min (0.1 µm) f f f
Rapid traverse override F0, 25, 50, 100% f f f
Feed per minute G94 f f f
Feed per rotation G95 f f f
Constant tangential speed control f f f
Cutting feedrate clamp f f f
Automatic acceleration/deceleration Rapid traverse: Linear f f f
Cutting feed: Exponential f f f