1. Fanuc
  2. Power Mate i-Model D/H Analog Servo Interface Unit Connection Material (B-63173EN/02-02)

Power Mate i-Model D/H Analog Servo Interface Unit Connection Material (B-63173EN/02-02) Supplement to Manual Page 27

Supplement to Manual
EDIT.
FANUC LTD
FANUC LTDFANUC LTD
FANUC LTD
SHEET
DRAW. NO.
CUST.
TITLE
DESCRIPTIONDESIG.DATE
B-63173EN/02-02
⑤ Setting connector number
No.
1936 Connector number of 1
st
interface unit
1937 Connector number of 2
nd
interface unit
Date type ：Byte
Data range：０～３（in case of analog servo interface unit）
０～７（in case of separate type detector interface unit）
In case of using interface unit, set the value, which subtracts 1 from the
connector number of each axis. Therefore, the number of connector 1～8
corresponds to 0～7.
Set 0 to the axis without interface unit
It is possible to use any connectors at any axis, but use the connector from
the small number. So, do not use the connector number 4 without using 3.
３）Turning off/on the power to Power Mate i
The description of setting continues to 4) Servo initial setting.
FSSB Setting example in case of using analog servo interface unit
［Example1：in case of two analog servo axis］
The analog servo interface unit is slave 1. Analog servo amplifiers are considered
as they are connected after the analog servo interface unit. So they are slaves 2 and
3.
No. 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919
６ ０ ４０ ４０ ４０ ４０ ４０ ４０ ４０
No. No.1023 No.1905 No.1936 No.1937
X
０００００００ ０ ０
Y
０００００００ ０
Power mate i
Analog servo
amplifier 1
X axis
Analog servo
interface
unit
(Basic unit)
JV11L
JV12L
Slave 1
Slave 2
Slave 3
24　
Analog servo
amplifier 2
Y axis
Previous page
Next page

Contents Summary of Power Mate i-Model D/H Analog Servo Interface Unit Connection Material (B-63173EN/02-02) Supplement to Manual

  • Page 1TECHNICAL REPORT (MANUAL) TMN99/009E Date 1999.. General Manager of Hardware Laboratory FANUC Power Mate i-MODEL D/ H Analog servo interface unit connection material Communicate this report to : ○ Your information ○ GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON ○ Machine tool builder Sal
  • Page 2FANUC Power Mate i-MODEL D/H CONNECTION MANUAL REVISION Type of applied technical documents Name FANUC Power Mate i-MODEL D/H CONNECTION MANUAL Spec.No./Version B-63173EN/02 Summary of change Group Name / Outline New, Add, Applicable Correct, Date Delete Basic Function Optional Function Unit Analog
  • Page 3Sec. 8.17 “the connection of analog servo interface unit” is added to the connection manual of FANUC Power Mate i-MODEL D/H B-63173EN/02. 17.1 Outline Analog servo interface unit of Power Mate i-MODEL D/H is for the connection to analog servo. Up to 8 axes analog servo amplifier can be connected to
  • Page 4extension unit Flat cable for analog servo interface A02B-0259-K850 unit Spare fuse A03B-0815-K001 24VDC 1.0A TITLE DRAW. NO. CUST. B-63173EN/02-02 SHEET EDIT. DATE DESIG. DESCRIPTION F FANUC LTD
  • Page 517.3 Structure Power Mate i -D/H FSSB line Analog voltage Analog Analog Servo 24VDC servo servo amp. moto Power interfac Feedback Pulse e encoder unit （basic ） GND1 Batter Analog servo Flat interfac Power cable e unit Analog Analog voltage Analog Servo servo servo amp. moto interfac e Feedback Pulse
  • Page 617.4 The connection of type F analog servo interface The ready signal and alarm signal from servo amplifier are 5VDC signals. 17.4.1 System structure 1) In case of using the built-in pulse coder Analog servo Analog interface unit servo J155 JV1nL amplifier JF10nL J156A／J156B Pulse TG servo encode mo
  • Page 7Analog servo interface unit Analog servo amplifier Connector JV1nL PCR- (PCR-EV20MDT) E20FS １ (A) 11 (B) or 2 (*A) 12 (*B) PCR- 3 *ENBL 13 OVL E20FA 4 0V 14 0V 5 (Z) 15 (ALM) ６ EC 16 0V J15 7 VCMD 17 (*SRDY) 8 0V 18 0V 9 (*Z) 19 (24VOUT) Ferrite core 10 *PRDY 20 *VRDY Note）The pin with ( ）mark must
  • Page 82) Cable J156A （Parallel interface） Cable J156A is for between analog servo interface unit (JF10nL) and pulse encoder and separate detector. Analog servo interface unit Pulse encoder or separate detector ＪＦ１０ｎL （ＰＣＲ－ＥＶ２０ＭＤＴ） １ Ａ １１ J 156A ２ ＊Ａ １２ ０Ｖ ３ Ｂ １３ ４ ＊Ｂ １４ ０Ｖ Connector ５ Ｚ １５ FI40-2015S Hous
  • Page 93) Cable J156B （Serial interface） Cable J156A is for between analog servo interface unit (JF10nL) and pulse encoder / separate detector. Analog servo interface unit Pulse encoder or separate detector ＪＦ１０ｎL （ＰＣＲ－ＥＶ２０ＭＤＴ） １ SD １１ J 156B ２ *SD １２ ０Ｖ ３ １３ ４ １４ ０Ｖ C on n e ct or ５ REQ １５ F I 4 0 -2 0 1
  • Page 104) Cable J37 Cable J37 is for between analog servo interface unit (JA4L) and the battery for separate detector. Analog servo interface unit（basic unit） Battery for separate detector ＪＡ４Ｌ （ＰＣＲ－ＥＶ２０ＭＤＴ） １ １１ （M3 t er m in a l ） ２ １２ J37 ＋ － ３ ０Ｖ １３ ＋６Ｖ ０Ｖ ４ １４ ５ １５ ６ １６ ７ ＋６Ｖ １７ Con n ector ８ １８ P CR-
  • Page 1117.4.3 Details of signals TITLE DRAW. NO. CUST. B-63173EN/02-02 SHEET EDIT. DATE DESIG. DESCRIPTION F FANUC LTD 09
  • Page 12TITLE DRAW. NO. CUST. B-63173EN/02-02 SHEET EDIT. DATE DESIG. DESCRIPTION F FANUC LTD 10
  • Page 13TITLE DRAW. NO. CUST. B-63173EN/02-02 SHEET EDIT. DATE DESIG. DESCRIPTION F FANUC LTD 11
  • Page 14TITLE DRAW. NO. CUST. B-63173EN/02-02 SHEET EDIT. DATE DESIG. DESCRIPTION F FANUC LTD 12
  • Page 1517.5 The connection of type M analog servo interface The ready signal and alarm signal from servo amplifier is 24VDC signal. 17.5.1 System structure 1) In case of using the built-in pulse coder Analog servo Analog interface unit J157 servo JV1nL amplifier Pulse Analog encoder servo 2) In case of usi
  • Page 16Analog servo interface unit Analog servo amplifier Connector JV1nL PCR- (PCR-EV20MDT) E20FS １ A 11 B or 2 *A 12 *B PCR- 3 （*ENBL） 13 （OVL） E20FA 4 （0V） 14 （0V） 5 Z 15 ALM ６ EC 16 0V J15 7 VCMD 17 *SRDY 8 （0V） 18 0V Ferrite core 9 *Z 19 24VOUT 10 *PRDY 20 （*VRDY） Note）The pin with ( ）mark must be ope
  • Page 174) Cable J158 Cable J158 is for analog servo interface unit (JV1nL) and analog servo amplifier. Analog servo interface unit Analog servo amplifier Connector JV1nL PCR- アナログサーボアンプ (PCR-EV20MDT) E20FS １ （PCA） 11 （PCB） or 2 （*PCA） 12 （*PCB） PCR- 3 （*ENBL） 13 （OVL） E20FA 4 （0V） 14 （0V） 5 （PCZ） 15 ALM ６
  • Page 18TITLE DRAW. NO. CUST. B-63173EN/02-02 SHEET EDIT. DATE DESIG. DESCRIPTION F FANUC LTD 15
  • Page 1917.5.3 Details of signals (1) VCMD, EC （Output） VCMD and EC are the speed command signals for the servo amplifier. Refer to 4.3 Details of signals (1) (2)A,*A,B,*B,Z,*Z （Input） These signals are received from the pulse coder. Refer to 4.3 Details of signal (7). (3)*PRDY （Output） *PRDY is the ready s
  • Page 2017.6 Power connections The power of analog servo interface unit must be supplied from external power supply 24VDC. Analog servo interface unit (basic) External power supply ＣＰ１１Ｌ DC24V±10％ １ ＋２４Ｖ （including an ２ ０Ｖ instantaneous value ３ and ripple） GND1 GND1 is signal ground of analog servo interfac
  • Page 2117.7 Select switch SW1 The input level of ready signal (input) and alarm signal (input) of type F analog servo interface are different from the input level of ready signal (input) and alarm signal (input) of type M analog servo interface. Type F or Type M is decided by select switch SW1. elect switc
  • Page 2217.9 Notice 1) Up to 2 axes are possible digital servo interface and analog servo interface in total. for Power Mate i-D. Up to 8 axes are possible digital servo interface and analog servo interface in total. for Power Mate i-H. 2) The group of the analog servo interface unit is one basic unit (2 ax
  • Page 23the parallel interface separate detector interface unit is used and the power is not supplied to it by an analog servo interface unit, it is necessary to turn on the power for it before when the power for an analog servo interface unit is turned on. Furthermore, in this situation, it is also necessa
  • Page 2417.10 Parameter setting ）In emergency stop condition, turn on the power of Power Mate i ）Follow the procedure below to set parameters concerned with FSSB. In the case of using an analog servo interface unit, the FSSB automatic setting function is not available. It is necessary to set the value of No
  • Page 25FMD The setting mode of FSSB is ０：Automatic. ：Manual setting 2. Notice In the case of using the analog servo interface unit, be sure to set 0 ③Setting of bit parameter No. 7 6 5 4 3 2 1 0 1905 PM2 PM1 FSL Data type : Bit FSL The interface type between servo amplifier and servo software is ０：Fast typ
  • Page 26④Setting Address Conversion Table for slave number No. 1910 The value of Address conversion Table for Slave 1 (ATR) 1911 The value of Address conversion Table for Slave 2 (ATR) 1912 The value of Address conversion Table for Slave 3 (ATR) 1913 The value of Address conversion Table for Slave 4 (ATR) 1
  • Page 27⑤ Setting connector number No. 1936 Connector number of 1st interface unit 1937 Connector number of 2nd interface unit Date type ：Byte Data range：０～３（in case of analog servo interface unit） ０～７（in case of separate type detector interface unit） In case of using interface unit, set the value, which su
  • Page 28［Example2：in case of one digital and one analog servo axis］ FSSB X axis Digital servo amplifier Slave 1 Power Mate FSSB i Analog servo interface JV11L Analog Y axis unit amplifier (Basic unit) Slave 3 Slave 2 Digital servo amplifier is slave 1 and analog servo interface unit is slave 2. Analog servo
  • Page 29No. 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 ６ ４ ５ ４８ ０ ３ ６ ４０ No. No.1023 No.1905 No.1936 No.1937 X ０００００００ ０ ０ Y ０００００００ ０ Z ３ ０００００００ ０ A ４ ０００００００ ３ ０ B ５ ００００００００ ０ ０ C ６ ０００００００* ０ ０ D ７ ０００００００ ０ ０ *At the digital servo axis which No.1023 is even number, the interface type between se
  • Page 302009 ANALOG SERDMY Data type：Bit SERDMY The serial feedback dummy function is ０：Invalidated ：Validated Notice In case of analog servo axis, set 1. ANALOG The analog servo interface function is ０：Invalidated. ：Validated. Notice In case of analog servo axis, set 1. No. 2165 Amplifier ID Data type：Byte
  • Page 31TECHNICAL REPORT (MANUAL) 009E Date 1999. . General Manager of Hardware Laboratory FANUC Power Mate i-MODEL D/ H Analog servo interface unit connection material Communicate this report to : Your information GE Fanuc-N, GE Fanuc-E FANUC Robotics CINCINNATI MILACRON Machine tool builder Sales agency E
  • Page 32FANUC Power Mate i-MODEL D/H CONNECTION MANUAL REVISION Type of applied technical documents Name FANUC Power Mate i-MODEL D/H CONNECTION MANUAL Spec.No./Version B-63173EN/02 Summary of change Group Name / Outline New, Add, Applicable Correct, Date Delete Basic Function Optional Function Unit Analog
  • Page 33Sec. 8.17 “the connection of analog servo interface unit” is added to the connection manual of FANUC Power Mate i-MODEL D/H B-63173EN/02. 2XWOLQH $QDORJVHUYRLQWHUIDFHXQLWRI3RZHU0DWHL02'(/'+LVIRUWKHFRQQHFWLRQWRDQDORJ VHUYR8SWRD[HVDQDORJVHUYRDPSOLILHUFDQEHFRQQHFWHGWR
  • Page 346WUXFWXUH 3RZHU 0DWHL '+ )66%OLQH $QDORJYROWDJH $QDORJ $QDORJ 6HUYR 9'& VHUYR VHUYRDPS PRWRU 3RZHU LQWHUIDF )HHGEDFN 3XOVH H HQFRGHU XQLW EDVLF *1' %DWWHU\ $QDORJ VHUYR )ODW LQWHUIDF 3RZHU FDEOH H XQLW $QDORJ $QDORJYROWDJH $QDORJ 6HUYR VHUYR VHUYRDPS PRWRU LQWHUIDF H )HHGEDFN 3XOVH
  • Page 357KHFRQQHFWLRQRIW\SH)DQDORJVHUYRLQWHUIDFH 7KHUHDG\VLJQDODQGDODUPVLJQDOIURPVHUYRDPSOLILHUDUH9'&VLJQDOV 6\VWHPVWUXFWXUH  ,QFDVHRIXVLQJWKHEXLOWLQSXOVHFRGHU $QDORJVHUYR $QDORJ LQWHUIDFHXQLW VHUYR - -9Q/ DPSOLILHU -)Q/ -$ -% 3XOVH 7* VHUYR HQFRGHU PR
  • Page 36$QDORJVHUYRLQWHUIDFHXQLW $QDORJVHUYRDPSOLILHU &RQQHFWRU -9Q/ 3&5()6 3&5(90'7 RU $  % 3&5()$  $  % +RXVLQJ  (1%/  29/ 3&59/%  9  9  =   $/0 (&  9 -  9&0'  65'<  9  9 =  9287 )HUULWHFRUH  35'<  95'< 1RWH 7KH SLQ ZLWK PDUNPXVWEHRSHQ &DEOH
  • Page 37 &DEOH-$ 3DUDOOHOLQWHUIDFH &DEOH-$LVIRUEHWZHHQDQDORJVHUYRLQWHUIDFHXQLW -)Q/ DQGSXOVHHQFRGHUDQGVHSDUDWH GHWHFWRU L J 156A FI40-2015S Housing FI-20-CV +6V and REQ signals are for separate absolute pulse coder. When separate absolute pulse coder is not used, these signals co
  • Page 38 &DEOH-% 6HULDOLQWHUIDFH &DEOH-$LVIRUEHWZHHQDQDORJVHUYRLQWHUIDFHXQLW -)Q/ DQGSXOVHHQFRGHUVHSDUDWH GHWHFWRU L SD J 156B *SD C on n e ct or REQ F I 4 0 -2 0 1 5 S H ou s in g *REQ F I -2 0 -C V + 6 V a n d R E Q s ig n a ls a r e for s e p a r a t e a b s olu t e p u ls e
  • Page 39 &DEOH- &DEOH-LVIRUEHWZHHQDQDORJVHUYRLQWHUIDFHXQLW -$/ DQGWKHEDWWHU\IRUVHSDUDWH GHWHFWRU M3 t er m in a l Con n ector P CR-E 20F S P CR-E 20F A H ou sin g P CR-V20LA (J 37) J A4L 1RWH 7KH H[WHQVLRQ XQLW KDV WKH FRQQHFWRU -$0 IRU FRQQHFWLRQ WKH EDWWHU\ IRU VHSDUDWH
  • Page 40'HWDLOVRIVLJQDOV  B-63173EN/02-02 ] 
  • Page 41 B-63173EN/02-02 ] 
  • Page 42 B-63173EN/02-02 ] 
  • Page 43 B-63173EN/02-02 ] 
  • Page 447KHFRQQHFWLRQRIW\SH0DQDORJVHUYRLQWHUIDFH 7KHUHDG\VLJQDODQGDODUPVLJQDOIURPVHUYRDPSOLILHULV9'&VLJQDO 6\VWHPVWUXFWXUH  ,QFDVHRIXVLQJWKHEXLOWLQSXOVHFRGHU $QDORJVHUYR $QDORJ LQWHUIDFHXQLW - VHUYR -9Q/ DPSOLILHU 3XOVH $QDORJ HQFRGHU VHUYRPRWRU  ,QFDVH
  • Page 45$QDORJVHUYRLQWHUIDFHXQLW $QDORJVHUYRDPSOLILHU &RQQHFWRU -9Q/ 3&5()6 3&5(90'7 RU $  % 3&5()$  $  % +RXVLQJ  (1%/  29/ 3&59/%  9  9  =  $/0 (&  9 -  9&0'  65'<  9  9 )HUULWHFRUH =  9287  35'<  95'< 1RWH 7KH SLQ ZLWK PDUNPXVWEHRSHQ &DEOHF
  • Page 46 &DEOH- &DEOH-LVIRUDQDORJVHUYRLQWHUIDFHXQLW -9Q/ DQGDQDORJVHUYRDPSOLILHU $QDORJVHUYRLQWHUIDFHXQLW $QDORJVHUYRDPSOLILHU &RQQHFWRU -9Q/ /R AX< 3&5()6 3&5(90'7 RU 3&$  3&% 3&5()$  3&$  3&% +RXVLQJ  (1%/  29/ 3&59/%  9  9  3&=  $/0 (&  9 -
  • Page 47'HWDLOVRIVLJQDOV  9&0'(& 2XWSXW 9&0'DQG(&DUHWKHVSHHGFRPPDQGVLJQDOVIRUWKHVHUYRDPSOLILHU 5HIHUWR'HWDLOVRIVLJQDOV   $ $% %= = ,QSXW 7KHVHVLJQDOVDUHUHFHLYHGIURPWKHSXOVHFRGHU 5HIHUWR'HWDLOVRIVLJQDO    35'< 2XWSXW 35'<LVWKHUHDG\VLJQDOLV
  • Page 483RZHUFRQQHFWLRQV 7KH SRZHU RI DQDORJ VHUYR LQWHUIDFH XQLW PXVW EH VXSSOLHG IURP H[WHUQDO SRZHU VXSSO\ 9'& 9'& DUH VXSSOLHG WKURXJK WKH FRQQHFWRU &3/ 7KH SRZHU FDQ EH VXSSOLHG IURP &30WRWKHQH[WXQLW  B-63173EN/02-02 ] 
  • Page 496HOHFWVZLWFK6: 7KHLQSXWOHYHORIUHDG\VLJQDO LQSXW DQGDODUPVLJQDO LQSXW RIW\SH)DQDORJVHUYR LQWHUIDFHDUHGLIIHUHQWIURPWKHLQSXWOHYHORIUHDG\VLJQDO LQSXW DQGDODUPVLJQDO LQSXW RIW\SH0DQDORJVHUYRLQWHUIDFH7\SH)RU7\SH0LVGHFLGHGE\VHOHFWVZLWFK 6: HOHFWVZLWF
  • Page 50 1RWLFH  8SWRD[HVDUHSRVVLEOHGLJLWDOVHUYRLQWHUIDFHDQGDQDORJVHUYRLQWHUIDFHLQWRWDO IRU3RZHU0DWHL'8SWRD[HVDUHSRVVLEOHGLJLWDOVHUYRLQWHUIDFHDQGDQDORJ VHUYRLQWHUIDFHLQWRWDOIRU3RZHU0DWHL+  7KHJURXSRIWKHDQDORJVHUYRLQWHUIDFHXQLWLVRQHEDVLFXQLW D[HV
  • Page 513DUDPHWHUVHWWLQJ ,QHPHUJHQF\VWRSFRQGLWLRQWXUQRQWKHSRZHURI3RZHU0DWHL )ROORZWKHSURFHGXUHEHORZWRVHWSDUDPHWHUVFRQFHUQHGZLWK)66% ,QWKHFDVHRIXVLQJDQDQDORJVHUYRLQWHUIDFHXQLWWKH)66%DXWRPDWLFVHWWLQJIXQFWLRQ LV QRW DYDLODEOH ,W LV QHFHVVDU\ WR VHW WKH YDOX
  • Page 52$XWRPDWLF 0DQXDOVHWWLQJ 1RWLFH ,QWKHFDVHRIXVLQJWKHDQDORJVHUYRLQWHUIDFHXQLWEHVXUHWRVHW 6HWWLQJRIELWSDUDPHWHU 1R           30 30 )6/ 'DWDW\SH %LW )6/ 7KHLQWHUIDFHW\SHEHWZHHQVHUYRDPSOLILHUDQGVHUYRVRIWZDUHLV )DVWW\SH 6ORZW\SH 1RWLFH ,QFDVHRIDQDORJ
  • Page 536HWWLQJ$GGUHVV&RQYHUVLRQ7DEOHIRUVODYHQXPEHU 1R   7KHYDOXHRI$GGUHVVFRQYHUVLRQ7DEOHIRU6ODYH $75   7KHYDOXHRI$GGUHVVFRQYHUVLRQ7DEOHIRU6ODYH $75   7KHYDOXHRI$GGUHVVFRQYHUVLRQ7DEOHIRU6ODYH $75   7KHYDOXHRI$GGUHVVFRQYHUVLRQ7DEOHIRU6ODYH $75   7
  • Page 546HWWLQJFRQQHFWRUQXPEHU 1R   &RQQHFWRUQXPEHURI LQWHUIDFHXQLW VW   &RQQHFWRUQXPEHURI LQWHUIDFHXQLW QG 'DWHW\SH %\WH 'DWDUDQJH LQFDVHRIDQDORJVHUYRLQWHUIDFHXQLW LQFDVHRIVHSDUDWHW\SHGHWHFWRULQWHUIDFHXQLW ,QFDVHRIXVLQJLQWHUIDFHXQLWVHWWKHYDOXHZKLFKVXEWUDF
  • Page 55([DPSOH LQFDVHRIRQHGLJLWDODQGRQHDQDORJVHUYRD[LV 'LJLWDOVHUYRDPSOLILHULVVODYHDQGDQDORJVHUYRLQWHUIDFHXQLWLVVODYH$QDORJVHUYR DPSOLILHULVVODYH 1R                     1R 1R 1R  1R  1R  ; < ([DPSOH LQFDVHRIWZRGLJLWDOD
  • Page 56VHUYRDPSOLILHULVVODYH  1R                     1R 1R 1R  1R  1R  ; < = $ % & ' $W WKH GLJLWDO VHUYR D[LV ZKLFK 1R LV HYHQ QXPEHU WKH LQWHUIDFH W\SH EHWZHHQ VHUYR DPSOLILHU DQG VHUYR VRIWZDUH LV 6ORZ W\SH 6HW 1R %
  • Page 571R          $1$/2* 6(5'0< 'DWDW\SH %LW 6(5'0< 7KHVHULDOIHHGEDFNGXPP\IXQFWLRQLV ,QYDOLGDWHG 9DOLGDWHG 1RWLFH ,QFDVHRIDQDORJVHUYRD[LVVHW $1$/2* 7KHDQDORJVHUYRLQWHUIDFHIXQFWLRQLV ,QYDOLGDWHG 9DOLGDWHG 1RWLFH ,QFDVHRIDQDORJVHUYRD[LVVHW 1R  $PSOLILHU,' '