1. Fanuc
  2. About the Specification Change of the Main Breaker for FANUC LASER C Series

About the Specification Change of the Main Breaker for FANUC LASER C Series Additional Manual Page 1

Additional Manual
EDIT.
FANUC LTD
SHEET
DRAW. NO.
CUST.
TITLE
001/3
DESCRIPTIONDESIG.DATE
01 05.04.20
Koba
y
ashi
N
ewl
y
About the specification change of the
main breaker for FANUC LASER C series
A-81053E-100
About the specification change of the main breaker for FANUC LASER C series
1. Outline
To improve the safety of the laser oscillator by the earth fault protection, a domestic (JPN) specification
main breaker of FANUC LASER C series is changed to the earth-leakage breaker.
2. Changing Model
JPN specification of Model C1000-E, C2000-E, C4000-E, C5000-E & C6000-E
3. Details of changing contents
3-1. Specification of earth-leakage breaker for each model
Refer to page 3 for the comparison of the sizes.
(1) C1000-E：Rated current 75A, Sensed current 30mA
Rated current is changed from 80A to 75A.
・Type : EG103C/75-30MA(made by Fuji Electric Co., Ltd.)
・FANUC purchase spec. ; A60L-0001-0424#K075BJG1
・Recommended solderless terminal (in case of the cable 22mm
2
)：22-S8;J.S.T. MfgCo.,
Ltd, 22-8S;NICHIFU Terminal Industries CO., Ltd.
・Maker's recommended torque：5.8[N･m]
(2) C2000-E：Rated current150A, Sensed current 30mA
・Type : EG203C/150-30MA(made by Fuji Electric Co., Ltd.)
・FANUC purchase spec. ; A60L-0001-0424#T150BL2
・Recommended solderless terminal (in case of the cable 38 mm
2
)：38-S8;J.S.T. MfgCo.,
Ltd, 38-8S;NICHIFU Terminal Industries CO., Ltd.
・Maker's recommended torque：10.5[N･m]
(3) C4000-E：Rated current 225A, Sensed current 30mA
Rated current is changed from 200A to 225A.
・Type : EG203C/225-30MA(made by Fuji Electric Co., Ltd.)
・FANUC purchase spec. ; A60L-0001-0424#T225BL2
・Recommended solderless terminal (in case of the cable 100 mm
2
)：CB100-S8;J.S.T.
MfgCo., Ltd, CB100-8; DAIDO Solderless Terminal MFG. CO., Ltd.
・Maker's recommended torque：10.5[N･m]
(4) C5000-E：Rated current 225A, Sensed current 30mA
・Type : EG203C/225-30MA(made by Fuji Electric Co., Ltd.)
・FANUC purchase spec. ; A60L-0001-0424#T225BL2
・Recommended solderless terminal (in case of the cable 100 mm
2
)：CB100-S8;J.S.T.
MfgCo., Ltd, CB100-8; DAIDO Solderless Terminal MFG. CO., Ltd.
・Maker's recommended torque：10.5[N･m]
Previous page
Next page

Contents Summary of About the Specification Change of the Main Breaker for FANUC LASER C Series Additional Manual

  • Page 1About the specification change of the main breaker for FANUC LASER C series 1. Outline To improve the safety of the laser oscillator by the earth fault protection, a domestic (JPN) specification main breaker of FANUC LASER C series is changed to the earth-leakage breaker. 2. Changing Model JPN speci
  • Page 2(5) C6000-E：Rated current 300A, Sensed current 100mA ・Type : EG403C/300-100MA(made by Fuji Electric Co., Ltd.) ・FANUC purchase spec. ; A60L-0001-0424#U300EJE2 ・Recommended solderless terminal (in case of the cable 200 mm2)：R200-12;J.S.T. MfgCo., Ltd, R200-12 ;NICHIFU Terminal Industries CO., Ltd . ・
  • Page 34. Application C1000-E is applied from the following Serial Number. The other models are scheduled to apply from the manufacturing in June, 2005. MODEL Application C1000-E L05410030、L05410031～ C2000-E C4000-E Scheduled to apply from the manufacturing in June,2005 C5000-E C6000-E 5. Comparison of siz