1.SETUP B-66284EN/01
- 2 -
1.1 OPERATING ENVIRONMENT
The following operating environment is required to use this tool:
Personal computer operating environment
Personal computer : PentiumIII-500MHz or higher processor
Basic software (OS) : Windows 2000 or Windows XP
Application software : Internet Explorer 6.00 or later
Internet Explorer 6.00SP1 or later is
required. Be sure to prepare Internet
Explorer 6.00SP1 or later.
Memory : 128Mbyte or more
Available hard-disk space : 30Mbyte or more
VGA monitor : 1024×768 pixel or more
65000 color or more
Peripheral equipment : PCMCIA-compliant memory card drive
At least a 16M byte memory card
CD-ROM drive (required during
installation)
Option specification
- Series 30i/31i/32i
(1) To operate screens created with FANUC PICTURE, the
corresponding option of FANUC PICTURE Function or FANUC
PICTURE Function for non-touch panel display (both of
functions with a usable custom software capacity of up to 6M
bytes) is required.
When screens created with FANUC PICTURE and a C executor
application created by the machine tool builder are used together,
the C executor option is required.
- Series 16i/18i/21i, Power Mate i
(1) To operate screens created with FANUC PICTURE, the option
of touch panel C (with a usable main CPU custom software size
of up to 6M bytes) of the Series 16i/18i/21i is required.
With the Power Mate i, up to 6M bytes can be used when using
the touch panel option (with a usable main CPU custom software
size of up to 6M bytes).
When screens created with FANUC PICTURE and a C executor
application created by the machine tool builder are used together,
the C executor option is required.
(2) To operate screens created with FANUC PICTURE on a
non-touch panel display unit requires the optional FANUC
PICTURE function (with a usable main CPU custom software
size of up to 6M bytes) of the Series 16i/18i/21i instead of the
options of (1) above.