FS 16i/18i-MA/TA Position-coder Feedback with any spindle Additional Manual Page 1
Additional Manual
Ed. DATE
Desig
.
DESCRIPTION
TITLE
NO.
FANUC Series 16i/18i
Position-coder Feedback with any spindle
A-77438E
PAGE
1/4
DS0100-04
01
981005 M.Ito Newly registered
Contents
1. Specification......................................................................... 2
2. Signals ................................................................................. 2
3. Parameters .......................................................................... 3
4. References........................................................................... 3
FANUC Series 16i/18i-MA/TA
Position-coder Feedback with any spindle
Specifications
Contents Summary of FS 16i/18i-MA/TA Position-coder Feedback with any spindle Additional Manual
- Page 1FANUC Series 16i/18i-MA/TA Position-coder Feedback with any spindle Specifications Contents 1. Specification......................................................................... 2 2. Signals ................................................................................. 2 3. Parameters .......
- Page 21. Specification Position-coders for 3rd/4th serial spindles can be used with Multi-spindle Control option. Consequently, Threading/synchronous feed can be performed with 3rd/4th spindles. See the following manual for the detail of Multi-spindle Control. FANUC Series 16i/18i/21i/160i/180i/210i CONNE
- Page 33. Parameters #7 #6 #5 #4 #3 #2 #1 #0 3704 PCS Data type : Bit PCS In Multi-spindle Control, 3rd/4th spindle position-coders are: 0: unavailable 1: available Position-coders for 3rd/4th serial spindles can be used. 2nd/3rd/4th position-coder selection signals are used for selection. NOTE1) It is ava
- Page 44. References FANUC Series 16i/18i/21i/160i/180i/210i CONNECTION MANUAL(FUNCTION) B-63003EN 9.10 MULTI-SPINDLE CONTROL DS0100-04 FANUC Series 16i/18i TITLE Position-coder Feedback with any spindle 01 981005 M.Ito Newly registered NO. A-77438E Ed. DATE Desig. DESCRIPTION PAGE 4/4