Specification Change of Master PCB for FS 0-C (A-77361E/01) Additional Manual Page 1
Additional Manual
Contents Summary of Specification Change of Master PCB for FS 0-C (A-77361E/01) Additional Manual
- Page 1
- Page 2Specification change of Master PCB (Control type B) for FANUC Series 0-C 1. Summary FANUC has a plan to change the Control B type Master PCB in the some controller of Series 0-C.So the specification number of the Master PCB will be changed. Control A type Master PCB is already changed.(Technical Rep
- Page 35.2 Parameter setting It is necessary the parameter related to CPU speed is set to High-speed mode. Do not set to Normal mode. It is not necessary to set the parameter in case of 0-PC, because 0-PC does not have this parameter. T series (TC, TF, TTC, GCC) No.398 bit3 =0 : High-speed mode =1 : Normal