OPERATION
B–63664EN/02
1. GENERAL
423
When the cycle start button is pressed, the nozzle performs one operation,
then stops. When the cycle start button is pressed again, the nozzle
performs the next operation, then stops. The program is checked in this
way. (See Section III–5.5.)
Cycle
start
Nozzle
Cycle
start
Cycle
start
Cycle
start
StopStop
Stop
Workpiece
Fig.1.4.1 (c) Single Block
Nozzle
CRT/MDI
X
Y
Z
Change according to the
machine movement
The nozzle does not move. Only the
current position display for each axis
changes.
Workpiece
Fig.1.4.2 (a) Machine Lock
When automatic operation is performed in auxiliary function lock mode
as well as in machine lock mode (see Section III–5.1), all auxiliary
functions are disabled. (See Section III–5.1.)
D Single block
1.4.2
Checking the Position
Display Change
Without Running the
Machine
Explanations
D Machine lock
D Auxiliary function lock