1. Fanuc
  2. Series 30i-MODEL A, Input of tool offset value measured

Series 30i-MODEL A, Input of tool offset value measured Additional Manual Page 1

Additional Manual
TECHNICAL REPORT NO. TMN 04/020E
Date :Mar .30, 2004
General Manager of
Software Laboratory
FANUC Series 30i-A Newly additional functions
1. Communicate this report to:
Your information only
GE Fanuc-N, GE Fanuc-E
FANUC Robotics
MILACRON
Machine tool builder
Sales agency
End user
2. Summary for Sales Documents
3. Notice
Applied software of FANUC Series 30i-A
G001/22(V) or later
G011/22(V) or later
G021/22(V) or later
4. Attached Document
Drawing No. refer to attached table
Copy :
FLB1 Manager (2 pages from cover)
FLB2 Manager (2 pages from cover)
FLB3 Manager (2 pages from cover)
Original section of issue
Vice
General
Manager
Manager Chief
Person in
Charge
No. FLB1-04/2218
Date Mar. 30, 2004
ADE
Previous page
Next page

Contents Summary of Series 30i-MODEL A, Input of tool offset value measured Additional Manual

  • Page 1TECHNICAL REPORT NO. TMN 04/020E Date :Mar .30, 2004 General Manager of Software Laboratory FANUC Series 30i-A Newly additional functions 1. Communicate this report to: Your information only GE Fanuc-N, GE Fanuc-E FANUC Robotics MILACRON Machine tool builder Sales agency End user 2. Summary for Sale
  • Page 2FANUC Series30i –A newly additional functions Drawing number Functions 1 A-79227E External Data Input 2 A-79226E One Touch Macro call 3 A-79196E Temporary absolute coordinate setting 4 A-79354E System alarm 5 A-79349E Touch Panel Control 6 A-79253E Distance coded linear scale interface 7 A-79364E Li
  • Page 3FANUC Series 30i-MODEL A Input of tool offset value measured Specifications FANUC Series 30i-MODEL A Title Input of tool offset value measured Draw A-79343E No. Ed. Date Design Description page 1/6 Date Jan.06.’04 Design. Apprv.
  • Page 4General The function is automaically setting offset value by the differennce between absolute coordinate value and the length of workpiece Details This is a function of setting an offset value by key-inputting a workpiece diameter manually cut and measured from the MDI keyboard.First the workpiece i
  • Page 5Signal address #7 #6 #5 #4 #3 #2 #1 #0 Gn040 PRC Parameter #7 #6 #5 #4 #3 #2 #1 #0 5005 PRC [Input type] Parameter input [Data type] Bit path #2 PRC Direct input of tool offset value and workpiece coordinate-system shift value. 0: Not use a PRC signal 1: Uses a PRC signal FANUC Series 30i-MODEL A Ti
  • Page 61.1 Operation for direct input of tool offset value Setting of offset value 1 Cut surface A in manual mode with an actual tool. Suppose that a workpiece coordinate system has been set. Surface B Surface A 2 CNC memorized absolute coordinate value of z axis, when PRC signal on the machine is turned o
  • Page 73-2 Move the cursor to the set offset number using cursor keys. 3-3 Press the address key Z to be set. 3-4 Key in the measured value (). 3-5 Press the soft key [MEASURE]. The difference between measured value  and the coordinate is set as the offset value. 4 Case of setting offset value of X axis,
  • Page 81. Case of setting the workpiece coordinate system shifting amount of z axis, Cut surface A in manual mode with an actual tool. 2 NC memorized absolute coordinate value of z axis, when PRC signal on the machine is turned on.Then, the tool can retract along two axes and spindle stop. 3 Measure distan