1. Fanuc
  2. Series 30i-MODEL A, Input of tool offset value measured

Series 30i-MODEL A, Input of tool offset value measured Additional Manual Page 2

Additional Manual
FANUC Series30i –A newly additional functions
Drawing number Functions
1 A-79227E
External Data Input
2 A-79226E One Touch Macro call
3 A-79196E
Temporary absolute coordinate setting
4 A-79354E
System alarm
5 A-79349E Touch Panel Control
6 A-79253E
Distance coded linear scale interface
7 A-79364E
Linear scale with distance-coded reference marks (serial)
8 A-79343E Input of tool offset Value Measured
9 A-79344E Input of tool offset Value Measured B
10 A-79345E Tool Management Extension Function
11 A-79346E Tool Management Function Oversize tools Support
12 A-79342E
External touch panel interface
13 A-79348E Tool center point control for 5-axis machining
14 A-79381E Tool axis direction tool length compensation
15 A-79355E
Index Table Indexing Function
16 A-79356E
Rotary axis control function
17 A-79357E
Extended External Machine Zero Point Shift function
18 A-79340E
Diameter and Radius setting switching function
19 A-79341E
Active offset value change function based on manual feed
20 A-79358E
Single Direction Positioning function
21 A-79366E
Background Editing
22 A-79368E
Memory Card Program Operation/Editing
23 A-75359E
Rotary table dynamic fixture offset
24 A-79351E
Three-Dimensional Error Compensation
25 A-79260E
Power Mate CNC Manager
26 A-79350E
Real-time Custom Macro
27 A-79360E
Improvement of stored stroke limit 1
28 A-79361E
Start lock, Interlock signal for each axis and direction
29 A-79367E
Rapid traverse override 0.1%
30 A-79363E
In-position check and servo error excess check in Torque limit
31 A-79414E
Small-Hole Peck Drilling Cycle
32 A-79352E
I/O Link β Manual handle interface
(Peripheral equipment control interface)
Previous page
Next page

Contents Summary of Series 30i-MODEL A, Input of tool offset value measured Additional Manual

  • Page 1TECHNICAL REPORT NO. TMN 04/020E Date :Mar .30, 2004 General Manager of Software Laboratory FANUC Series 30i-A Newly additional functions 1. Communicate this report to: Your information only GE Fanuc-N, GE Fanuc-E FANUC Robotics MILACRON Machine tool builder Sales agency End user 2. Summary for Sale
  • Page 2FANUC Series30i –A newly additional functions Drawing number Functions 1 A-79227E External Data Input 2 A-79226E One Touch Macro call 3 A-79196E Temporary absolute coordinate setting 4 A-79354E System alarm 5 A-79349E Touch Panel Control 6 A-79253E Distance coded linear scale interface 7 A-79364E Li
  • Page 3FANUC Series 30i-MODEL A Input of tool offset value measured Specifications FANUC Series 30i-MODEL A Title Input of tool offset value measured Draw A-79343E No. Ed. Date Design Description page 1/6 Date Jan.06.’04 Design. Apprv.
  • Page 4General The function is automaically setting offset value by the differennce between absolute coordinate value and the length of workpiece Details This is a function of setting an offset value by key-inputting a workpiece diameter manually cut and measured from the MDI keyboard.First the workpiece i
  • Page 5Signal address #7 #6 #5 #4 #3 #2 #1 #0 Gn040 PRC Parameter #7 #6 #5 #4 #3 #2 #1 #0 5005 PRC [Input type] Parameter input [Data type] Bit path #2 PRC Direct input of tool offset value and workpiece coordinate-system shift value. 0: Not use a PRC signal 1: Uses a PRC signal FANUC Series 30i-MODEL A Ti
  • Page 61.1 Operation for direct input of tool offset value Setting of offset value 1 Cut surface A in manual mode with an actual tool. Suppose that a workpiece coordinate system has been set. Surface B Surface A 2 CNC memorized absolute coordinate value of z axis, when PRC signal on the machine is turned o
  • Page 73-2 Move the cursor to the set offset number using cursor keys. 3-3 Press the address key Z to be set. 3-4 Key in the measured value (). 3-5 Press the soft key [MEASURE]. The difference between measured value  and the coordinate is set as the offset value. 4 Case of setting offset value of X axis,
  • Page 81. Case of setting the workpiece coordinate system shifting amount of z axis, Cut surface A in manual mode with an actual tool. 2 NC memorized absolute coordinate value of z axis, when PRC signal on the machine is turned on.Then, the tool can retract along two axes and spindle stop. 3 Measure distan