FANUC Series 0i Additional Manual Page 1
Additional Manual
Contents Summary of FANUC Series 0i Additional Manual
- Page 1FANUC Series 0i -TB/TC Spindle Speed Monitoring Specification FANUC Series 0i–TB/TC Title Spindle Speed Monitoring Specification Draw No. A-79135 02 05.05.16 Description of 0i-TC is added. Edit Date Design Description Sheet 1 /6 Date 03.04.18 Desig. Apprv.
- Page 21. Outline By this function, it is possible to compare the spindle motor speed calculated by the feedback pulse from the spindle motor sensor with reference speed and also to compare the spindle speed calculated by the feedback pulse from position coder attached to the spindle with reference speed.
- Page 32. Series and Editions of Applicable Software FS0i-TB CNC software Series Edition Remark D6A1 D(04) and subsequent editions FS0i-TC CNC software Series Edition Remark D6B1 A(01) and subsequent editions Spindle software Series Edition Remark 9D50 F6(preliminary), G(07) and subsequent editions FANUC S
- Page 43. Motor Speed Check By this function, the spindle motor speed is calculated by the feedback pulse from the spindle motor directly instead from the position coder attached to the spindle. The spindle motor speed is displayed on the diagnosis No.718, 719. Block diagram of spindle speed reading The bl
- Page 53.1. Diagnosis The spindle motor speeds are displayed on the diagnosis screen. 1st spindle motor speed st 718 1 spindle motor speed 2nd spindle motor speed nd 719 2 spindle motor speed [Data form] word [Data unit] 1 min-1 [Data range] 0 ~ 65535 3.2. Spindle motor speed check by PMC ladder sequence I
- Page 64. Spindle Speed Check By spindle software, the spindle speed calculated by feedback pulse from position coder attached to the spindle is monitored. When it exceeds the reference speed, the spindle software detects the spindle alarm (alarm 9126, SPM alarm “C6”) and stops the spindle motor by control