2. SETUP B-75044EN/02
-44-
1st to 3rd Directory Searching Sub Program
You can set up to three directories for storing the subprograms. 1 to
3 indicate the search order. That is, when a subprogram having the
same number is located in [1st Directory Searching Sub Program]
and [2nd Directory Searching Sub Program], the subprogram in [1st
Directory Searching Sub Program] is transferred.
Setting the List File Transfer Method
1 Select the [Download] panel in the [Machine Configuration] dialog box.
2 Select either of “Separate Transfer” or “Extended Transfer” in the
[Transfer Styles for NC Programs Registered in List File] frame.
3 If you have selected “Extended Transfer”, also set [Wait for send buffer
to reach 0 before proceeding to next record in extended transfer mode].
2.6.5 Upload Settings for Machine
1 Select the [Upload] panel in the [Machine Configuration] dialog box.
These settings are not used now but are provided for the future.
Setup as the following figure.
NOTE
The subprogram is searched for only from the directories set at [1st to
3rd Directory Searching Sub Program]. Subprograms will not be
searched for even if [Default Directory] is set unless you set [1st to 3rd
Directory Searching Sub Program].
WARNING
If invalid settings are specified, the FA SYSTEM for PC might behave
unexpectedly.