FANUC Series 30i/31i/32i Additional Manual Page 1
Additional Manual
Contents Summary of FANUC Series 30i/31i/32i Additional Manual
- Page 1FANUC Series 30i/31i/32i -A, 31i –A5 The notice of using the high-speed skip function FANUC Series 30i/31i/32i –A,31i –A5 TITLE The notice of using the high-speed skip function DRAW A-79672E EDIT DATE DISIGNE APPROV. DESCRIPTION FANUC LTD SHEET 1/4
- Page 2Outline In the high speed skip function of Series 30i/31i/32i, please pay attention to the connection of the skip signal line. Because the contact state is different from Series 15i/16i/18i/21i/0i when the CNC recognizes the input of skip signal. Series 30i/31i/32i : The skip signal is assumed to be
- Page 3High-speed skip status signal HD00-HD07
#7 #6 #5 #4 #3 #2 #1 #0 Fn122 HDO7 HDO6 HDO5 HDO4 HDO3 HDO2 HDO1 HDO0 [Classification] Output signal [Function] This signal informs the PMC of the input status of the high-speed skip signal. [Output condition] 1: When the contact of high-speed skip sign - Page 4Note 1 The plus (+) sign of IiH/IiL represents the direction of flow into the receiver. The minus (−) sign of IiH/IiL represents the direction of flow out of the receiver. 2 The high-speed skip signal is assumed to be 1 when the input voltage is at a low level and 0 when it is at a high level. 3 The